16.5~30W AC-DC Single Output and Medical Type Desktop M ES3 0A se ries Features : EUniversal AC input / Full range E3 pole AC inlet IEC320-C14 g ELow leakage current <300 A EClassI power ( with earth pin) EFull output 3~48V safety approval EProtections: Short circuit / Overload / Over voltage / Over temp. EFully enclosed plastic case EMedical safety approved (MOPP level) EFix switching frequency and regulation ETopology: Top switch circuit ELED indicator for power on EApprovals: UL / CUL / TUV / CB / CE E2 years warranty SPECIFICATION ORDER NO. MES30A-0P1J MES30A-1P1J MES30A-1-1P1J MES30A-2P1J MES30A-3P1J MES30A-4P1J MES30A-5P1J MES30A-6P1J MES30A-7P1J MES30A-8P1J SAFETY MODEL NO. MES30A-0 MES30A-1 MES30A-1-1 MES30A-2 MES30A-3 MES30A-4 MES30A-5 MES30A-6 MES30A-7 MES30A-8 DC VOLTAGE Note.2 3.3V 5V 7.5V 9V 12V 15V 18V 24V 28V 48V RATED CURRENT 5A 5A 3.33A 3.33A 2.5A 2.0A 1.66A 1.25A 1.07A 0.62A CURRENT RANGE 0 ~ 5A 0 ~ 5A 0 ~ 3.33A 0 ~3.33A 0 ~ 2.5A 0 ~ 2.0A 0 ~ 1.66A 0 ~ 1.25A 0 ~ 1.07A 0 ~ 0.62A RATED POWER 16.5W 25W 25W 30W 30W 30W 30W 30W 30W 30W RIPPLE & NOISE (max.) Note.3 30mVp-p 30mVp-p 40mVp-p 50mVp-p 50mVp-p 60mVp-p 70mVp-p 80mVp-p 100mVp-p 100mVp-p OUTPUT VOLTAGE ADJ. RANGE Fixed VOLTAGE TOLERANCE Note.4 8.0% -5% ~ +8% 4.0% 4.0% 3.0% 2.0% 2.0% 2.0% 2.0% 2.0% LINE REGULATION Note.5 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% LOAD REGULATION Note.6 8.0% -5% ~ +8% 4.0% 4.0% 3.0% 2.0% 2.0% 2.0% 2.0% 2.0% SETUP, RISE, HOLD UP TIME 300ms, 50ms, 16ms at full load VOLTAGE RANGE 90 ~ 264VAC 135 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 56% 70% 72% 74% 76% 78% 78% 80% 80% 82% INPUT AC CURRENT 0.8A / 100VAC INRUSH CURRENT (max.) 35A / 230VAC LEAKAGE CURRENT (max.) Note.7 Earth leakage current < 300gA/264VAC , Touch current < 60gA/264VAC 112 ~ 250% rated output power 150~350% rated output power OVERLOAD Protection type : Hiccup mode, recovers automatically after fault condition is removed 110 ~ 140% rated output voltage PROTECTION OVER VOLTAGE Protection type : Hiccup mode, recovers automatically after fault condition is removed Tj 135J typically (IC1) detect on main control IC OVER TEMPERATURE Protection type : Shut down o/p voltage, recovers automatically after temperature goes down WORKING TEMP. 0 ~ +65J (Refer toDerating Curv) WORKING HUMIDITY 20% ~ 90% RH non-condensing -20 ~ +85J, 10 ~ 95% RH ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT 0.03% /J ( 0 ~ 5J0 ) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1 approved SAFETY STANDARDS WITHSTAND VOLTAGE I/P-O/P: 5656VDC , I/P-FG: 2828VDC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG:100M Ohms / 500VDC / 25J/ 70% RH EMC (Note. 8) EMC EMISSION Compliance to EN55011(CISPR11) class B, EN61000-3-2,3 EMC IMMUNITY Compliance to EN60601-1-2 (EN61000-4-2,3,4,5,6,8,11), light industry level, criteria A MTBF 400Khrs min. MIL-HDBK-217F (25J) OTHERS DIMENSION 108*67*36mm (L*W*H) 0.3kg 54pcs/ 20kg / CARTON PACKING PLUG Standard type P1J: 2.1r * 5.5r * 11mm, turning fork type, center positive for stock Other type available by customer requested CONNECTOR CABLE SPT-2 16AWG 4FT for 3.3 ~ 7.5V UL1185 18AWG 6FT for 9 ~48V 1.All parameters are specified at 230VAC input, rated load, 25J 70% RH ambient. NOTE 2.DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3.Ripple & noise are measured at 20MHz by using a 12 twisted pair terminated with a 0.1uf & 47uf capacitor. 4.Tolerence: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 6.Load regulation is measured from 0% to 100% rated load. 7.Touch current was measured from primary input to DC output. 8.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:MES30A-SPEC 2013-01-1516.5~30W AC-DC Single Output and Medical Type Desktop M ES3 0A se ries UUSSPP--22 2255 ss ee rrii ee ss Mechanical Specification Unit:mm SPT-2 16AWG 4ft for 3.3V,5V,7.5V UL 1185 18AWG 6ft for others 106 36 11 100 10mm POWER LED ID 2.1 x OD 5.5 Outside Inside 108 -V not connected to AC FG 69.9 Plug Assignment 18 Standard plug: P1J (option) 3 P1J P/N OUTPUT R1 + CENTER NAME PLATE RUBBER FOOTX4 Derating Curve Static Characteristics 100 100 80 60 50 0 15 30 40 45 60 70 0 50 60 70 80 90 100 260 Ta (J) INPUT VOLTAGE File Name:MES30A-SPEC 2013-01-15 67 LOAD (%) 45 36 SWITCHING ADAPTOR 42 LOAD (%) 67 33.5