15W High Reliable Green Medical On Board Type M F M -15 series + + No load power consumption<0.075W (0.09W for 3.3V) EMI class B for class configuration (0.09W for 3.3V) File Name:MFM-15-SPEC 2017-09-2515W High Reliable Green Medical On Board Type M F M -15 series SSPPEECCIIFFIICCAATTIIOONN MODEL MFM-15-3.3 MFM-15-5 MFM-15-12 MFM-15-15 MFM-15-24 DC VOLTAGE 3.3V 5V 12V 15V 24V RATED CURRENT 3.5A 3A 1.25A 1A 0.63A CURRENT RANGE Note.2 0 ~ 3.5A 0 ~ 3A 0 ~ 1.25A 0 ~ 1A 0 ~ 0.63A PEAK CURRENT 3.85A 3.3A 1.38A 1.1A 0.69A 11.6W 15W 15W 15W 15.1W RATED POWER PEAK LOAD(10sec.) Note.3 1 2. 7 W 16.6W 16.5W 16.6W 16.5W RIPPLE & NOISE (max.) Note.4 150mVp-p 150mVp-p 150mVp-p 180mVp-p 180mVp-p OUTPUT VOLTAGE TOLERANCE Note.5 1.5% 1.5% 1.5% 1.5% 1.5% LINE REGULATION 0.5% 0.5% 0.3% 0.3% 0.3% LOAD REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% SETUP, RISE TIME 1500ms, 30ms/230VAC 1500ms, 30ms/115VAC at full load HOLD UP TIME (Typ.) 40ms/230VAC 10ms/115VAC at full load VOLTAGE RANGE Note.6 80 ~ 264VAC FREQUENCY RANGE 47 ~ 440Hz EFFICIENCY (Typ.) 83.5% 85.5% 86.5% 87% 86.5% INPUT AC CURRENT (Typ.) 0.6A/115VAC 0.3A/230VAC INRUSH CURRENT (Typ.) COLD START 20A/115VAC 45A/230VAC LEAKAGE CURRENT (max.) Note.7 Touch current <80 A/264VAC 110% ~ 150% rated output power OVERLOAD Protection type : Hiccup mode, recovers automatically after fault condition is removed 3.8 ~ 5V 5.8 ~ 6.8V 13.8 ~ 16.2V 17.3 ~ 20.3V 27.6 ~ 32.4V PROTECTION OVER VOLTAGE Protection type : Shut off o/p voltage, clamping by zener diode Protection type : Shut down o/p voltage, recovers automatically after temperature goes down OVER TEMPERATURE WORKING TEMP. -35 ~ +85 (Refer toDerating Curv) 20 ~ 90% RH non-condensing WORKING HUMIDITY STORAGE TEMP., HUMIDITY -40 ~ +85, 10 ~ 95% RH non-condensing ENVIRONMENT TEMP. COEFFICIENT 0.03%/ (0 ~ 55) SOLDERING TEMPERATURE 260 5/10sec.max. VIBRATION 10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes OPERATING ALTITUDE Note.8 5000 meters rd SAFETY STANDARDS IEC60601-1, EN60601-1, UL ANSI/AAMI ES60601-1(3.1 version), CAN/CSA-C22 3 Edition approved Design refer to EN60335-1 ISOLATION LEVEL Primary-Secondary: 2xMOPP WITHSTAND VOLTAGE I/P-O/P:4KVAC ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH Parameter Standard Test Level / Note Conducted emission EN55011 (CISPR11) Class B EMC EMISSION Radiated emission EN55011 (CISPR11) Class B EN61000-3-2 Class A Harmonic current EN61000-3-3 ----- Voltage flicker SAFETY & EN60601-1-2 EMC Parameter Standard Test Level / Note (Note.9) ESD EN61000-4-2 Level 4, 15KV air Level 4, 8KV contact Level 3, 10V/m( 80MHz~2.7GHz ) RF field susceptibility EN61000-4-3 Table 9, 9~28V/m( 385MHz~5.78GHz ) EN61000-4-4 EFT bursts Level 3, 2KV EMC IMMUNITY Surge susceptibility EN61000-4-5 Level 3, 1KV/Line-Line Conducted susceptibility EN61000-4-6 Level 3, 10V Magnetic field immunity EN61000-4-8 Level 4, 30A/m 100% dip 1 periods, 30% dip 25 periods, Voltage dip, interruption EN61000-4-11 100% interruptions 250 periods MTBF 1210Khrs min. MIL-HDBK-217F (25) OTHERS DIMENSION 49*23.8*23mm (L*W*H) or 1.93 *0.94*0 .91 inch 0.028Kg 200pcs/6.6Kg/0.97CUFT PACKING NOTE File Name:MFM-15-SPEC 2017-09-25