100W DC-DC Half-Brick Regulated Single Output Converter MHB100 series Features : Half-brick size (2.28 2.4 0.5 ) with industry standard pin out 2:1 wide input range Protections: Short circuit / Over current / Over voltage / Over temperature High efficiency up to 89% 1500VDC I/O isolation Built-in remote ON/OFF control Built-in remote sense function Trimming output 10% Five-sided shield metal case Optional heat sinks for extended operating temperature Output 2.5V/3.3V/15V available Approvals: UL / CUL / CE 3 years warranty SPECIFICATION MODEL MHB100-24S05 MHB100-24S12 MHB100-24S24 MHB100-48S05 MHB100-48S12 MHB100-48S24 DC VOLTAGE 5V 12V 24V 5V 12V 24V CURRENT RANGE 0 ~ 20A 0 ~ 8.3A 0 ~ 4.17A 0 ~ 20A 0 ~ 8.3A 0 ~ 4.17A RATED POWER 100W RIPPLE & NOISE (max.) Note.2 100mVp-p 150mVp-p 240mVp-p 100mVp-p 150mVp-p 240mVp-p VOLTAGE ACCURACY Note.3 1.0% OUTPUT LINE REGULATION 0.2% LOAD REGULATION 0.2% SWITCHING FREQUENCY (Typ.) 500KHz EXTERNAL TRIM ADJ. RANGE (Typ.) 10% EXTERNAL CAPACITIVE LOAD (max.) 20000uF 8300uF 4170uF 20000uF 8300uF 4170uF RATED DC INPUT 24VDC 48VDC VOLTAGE RANGE 18 ~ 36VDC 36 ~ 75VDC SURGE VOLTAGE (100ms max.) 50VDC 100VDC UNDER VOLTAGE LOCKOUT Power up: 17VDC, Power down: 16VDC Power up: 34VDC, Power down: 32.5VDC INPUT EFFICIENCY (Typ.) 84% 87% 87% 86% 89% 88% FULL LOAD 5020mA 4880mA 4905mA 2480mA 2445mA 2465mA DC CURRENT NO LOAD 50mA 50mA FILTER Pi-network 110 ~ 140% rated output power OUTPUT OVER CURRENT Protection type : Over current limiting, recovers automatically after fault condition is removed 115 ~ 140% rated output voltage PROTECTION OUTPUT OVER VOLTAGE (Typ.) Protection type : Output voltage clamp Protection type : Can be continuous, recovers automatically after fault condition is removed OUTPUT SHORT CIRCUIT OVER TEMPERATURE 100 5 of case temperature Please refer toRemote ON/OFF Contro for details FUNCTION REMOTE CONTROL OPERATING 10%, Please refer toExternal Output Trimmin for details OUTPUT TRIMMING WORKING TEMPERATURE (Typ.) -40 ~ +100 Thermal shutdown at 100 5 of case temperature (please refer toThermal Curv) WORKING HUMIDITY 0% ~ 95% RH max. ENVIRONMENT STORAGE TEMP., HUMIDITY -55 ~ +105 , 0 ~ 95% RH TEMP. COEFFICIENT 0.03%/ (0~60 UL60950-1 approved SAFETY STANDARDS ISOLATION VOLTAGE I/P-O/P:1500VDC, I/P-Case:1500VDC, O/P-Case:1500VDC SAFETY & ISOLATION RESISTANCE EMC I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH (Note 4) Compliance to EN55022 (CISPR22) Class A with external components (please refer toEMC Suggestion Circui) EMC EMISSION EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8 EN55024, light industry level, criteria A CASE MATERIAL Aluminum MTBF 900K hrs typ. MIL-HDBK-217F (25 ) OTHERS DIMENSION 57.9*61*12.7mm (2.28 *2.40 *0.5 ) (L*W*H) 95g WEIGHT 1. All parameters NOT specially mentioned are measured at 24,48VDC input, rated load and 25 of ambient temperature. NOTE 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12 twisted pair-wire terminated with a 1uf ceramic & 10uf tantalum capacitor across output. 3. The power supply need to connect+Vou to+R. and-Vou to-R.. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. File Name:MHB100-SPEC 2011-09-08100W DC-DC Half-Brick Regulated Single Output Converter MHB100 series Mechanical Specification Unit:inch mm All Dimensions In Inches mm Tolerance Inches: X.XX= 0.02 , X.XXX= 0.010 Millimeters: X.X= 0.5 , X.XX= 0.25 0.18 min. 0.50 4.6 12.7 Mounting Inserts M3*0.5 BOTTOM VIEW R1.50 4 5 3 6 7 2 8 1 9 SIDE VIEW 1.90 48.3 2.28 57.9 Pin No. Assignment Pin No. Assignment Pin No. Assignment Pin No. Assignment +Vin -Vin 7 1 4 Trim 2 R.C. 5 -Vout 8 +R.S. 3 Case 6 -R.S. 9 +Vout Remote ON/OFF Control The MHB100 series allow the user to switch the power ON and OFF electronically by their remote ON/OFF feature. The MHB100 series are available withPositive Logi (standard) orNegative Logi (option). Logic table Logic State(pin2) Positive logic Negative logic Logic Low-Switch Closed Power OFF(<0.8Vdc) Power ON(<0.8Vdc) Logic High-Switch Open Power ON(Open circuit) Power OFF(Open circuit) Note: 1.Logic compatibility : R.C.(pin2) ~ -Vin(pin4). 2.Suffix to the model number with Negative logic remote ON/OFF. R.C.(pin2) MHB100 High singal here disable output -Vin(pin4) Example control circuit(positive logic) File Name:MHB100-SPEC 2011-09-08 2.40 61.0 2.00 50.8 1.40 35.56 0.60 15.24 0.04 1.02 0.08 2.03