5W High Reliable Green Medical Encapsulated Type M PM -05 series + + No load power consumption<0.075W Extremely low leakage current EMI class B for class configuration 48K hours File Name:MPM-05-SPEC 2017-10-235W High Reliable Green Medical Encapsulated Type M PM -05 series SPECIFICATION MODEL MPM-05-3.3 MPM-05-5 MPM-05-12 MPM-05-15 MPM-05-24 DC VOLTAGE 3.3V 5V 12V 15V 24V RATED CURRENT 1.25A 1A 0.42A 0.33A 0.23A CURRENT RANGE Note.2 0 ~ 1.25A 0 ~ 1A 0 ~ 0.42A 0 ~ 0.33A 0 ~ 0.23A PEAK CURRENT 1.38A 1.1A 0.46A 0.36A 0.25A 4.1W 5W 5W 5W 5.5W RATED POWER PEAK LOAD(10sec.) Note.3 4. 6 W 5.5W 5.5W 5.4W 6W OUTPUT RIPPLE & NOISE (max.) Note.4 100mVp-p 100mVp-p 150mVp-p 150mVp-p 180mVp-p 2.5% 2.5% 2.5% 2.5% 2.5% VOLTAGE TOLERANCE Note.5 0.3% 0.3% 0.3% 0.3% 0.3% LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION SETUP, RISE TIME 1000ms, 30ms/230VAC 1000ms, 30ms/115VAC at full load HOLD UP TIME (Typ.) 40ms/230VAC 12ms/115VAC at full load VOLTAGE RANGE Note.6 80 ~ 264VAC FREQUENCY RANGE 47 ~ 440Hz EFFICIENCY (Typ.) 74% 80% 80% 81% 82% INPUT AC CURRENT (Typ.) 0.2A/115VAC 0.1A/230VAC INRUSH CURRENT (Typ.) COLD START 25A/115VAC 45A/230VAC LEAKAGE CURRENT (max.) Note.7 Touch current <80 A/264VAC 110% ~ 180% rated output power OVERLOAD Protection type : Hiccup mode, recovers automatically after fault condition is removed 3.8 ~ 5V 5.8 ~ 6.8V 13.8 ~ 16.2V 17.3 ~ 20.3V 27.6 ~ 32.4V PROTECTION OVER VOLTAGE Protection type : Shut off o/p voltage, clamping by zener diode OVER TEMPERATURE Protection type : Shut down o/p voltage, recovers automatically after temperature goes down -40 ~ +85 (Refer toDerating Curv) WORKING TEMP. 20 ~ 90% RH non-condensing WORKING HUMIDITY STORAGE TEMP., HUMIDITY -40 ~ +100, 10 ~ 95% RH non-condensing ENVIRONMENT TEMP. COEFFICIENT 0.03%/ (0 ~ 60) SOLDERING TEMPERATURE 2605/10sec.max. VIBRATION 10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes OPERATING ALTITUDE Note.8 5000 meters rd SAFETY STANDARDS IEC60601-1, EN60601-1, UL ANSI/AAMI ES60601-1(3.1 version), CAN/CSA-C22 3 Edition approved Design refer to EN60335-1 ISOLATION LEVEL Primary-Secondary: 2xMOPP WITHSTAND VOLTAGE I/P-O/P:4KVAC ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH Parameter Standard Test Level / Note Conducted EN55011 (CISPR11) Class B Radiated EN55011 (CISPR11) Class B EMC EMISSION Harmonic Current EN61000-3-2 Class A Voltage Flicker EN61000-3-3 ----- SAFETY & EN60601-1-2 EMC (Note 9) Parameter Standard Test Level / Note ESD EN61000-4-2 Level 4, 15KV air Level 4, 8KV contact Level 3, 10V/m( 80MHz~2.7GHz ) RF field susceptibility EN61000-4-3 Table 9, 9~28V/m( 385MHz~5.78GHz ) EN61000-4-4 EFT bursts Level 3, 2KV EMC IMMUNITY Surge susceptibility EN61000-4-5 Level 3, 1KV/Line-Line Conducted susceptibility EN61000-4-6 Level 3, 10V EN61000-4-8 Magnetic field immunity Level 4, 30A/m 100% dip 1 periods, 30% dip 25 periods, Voltage dip, interruption EN61000-4-11 100% interruptions 250 periods MTBF 1799.5Khrs min. MIL-HDBK-217F (25) 45.7*25.4*21.5mm (L*W*H) or 1.8*1.0 0.85 inch OTHERS DIMENSION 0.035Kg 270pcs/10.5Kg/0.97CUFT PACKING NOTE File Name:MPM-05-SPEC 2017-10-23