MPS-30-24 Mean Well

30W Single Output for Medical Type MPS-30 series % & ( % %) * % + ,-. - ( % / % % <1 > > +9+ < > > +9+ C SPECIFICATION MODEL MPS-30-5 MPS-30-12 MPS-30-15 MPS-30-24 MPS-30-27 MPS-30-48 DC VOLTAGE 5V 12V 15V 24V 27V 48V RATED CURRENT 5A 2.5A 2A 1.2A 1.1A 0.6A CURRENT RANGE 0 ~ 5A 0 ~ 2.5A 0 ~ 2A 0 ~ 1.2A 0 ~ 1.1A 0 ~ 0.6A RATED POWER 25W 30W 30W 28.8W 29.7W 28.8W RIPPLE & NOISE (max.) Note.2 80mVp-p 120mVp-p 150mVp-p 240mVp-p 240mVp-p 240mVp-p OUTPUT VOLTAGE TOLERANCE Note.3 3.0% 3.0% 3.0% 3.0% 3.0% 2.0% LINE REGULATION 1.0% 1.0% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION 2.0% 1.0% 1.0% 1.0% 1.0% 1.0% SETUP, RISE TIME 500ms, 30ms/230VAC 500ms, 30ms/115VAC at full load HOLD UP TIME (Typ.) 70ms/230VAC 12ms/115VAC at full load VOLTAGE RANGE 88 ~ 264VAC auto switch 120 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 72% 75% 76% 77% 78% 78% INPUT AC CURRENT (Typ.) 0.8A/115VAC 0.5A/230VAC INRUSH CURRENT (Typ.) COLD START 30A/230VAC LEAKAGE CURRENT Earth leakage current < 200A/264VAC Above 105% rated output power OVERLOAD Protection type : Hiccup mode, recovers automatically after fault condition is removed 5.5 ~ 6.75V 13.2 ~ 16.2V 16.5 ~ 20.25V 26.4 ~ 32.4V 29.7 ~ 36.45V 52.8 ~ 64.8V PROTECTION OVER VOLTAGE Protection type : Hiccup mode, recovers automatically after fault condition is removed OVER TEMPERATURE Shut down o/p voltage, re-power on to recover WORKING TEMP. -10 ~ +60 (Refer toDerating Curv) WORKING HUMIDITY 20 ~ 90% RH non-condensing -20 ~ +85, 10 ~ 95% RH ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT 0.03%/ (0 ~ 50) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes SAFETY STANDARDS ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1 approved ISOLATION LEVEL Primary-Secondary: 2xMOPP, Primary-Earth:1xMOPP SAFETY & WITHSTAND VOLTAGE I/P-O/P:4KVAC I/P-FG:2KVAC O/P-FG:SHORT EMC ISOLATION RESISTANCE I/P-O/P, I/P-FG:100M Ohms / 500VDC / 25/ 70% RH (Note 4) EMC EMISSION Compliance to EN55011 (CISPR11) Class B, EN61000-3-2,-3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN60601-1-2, medical level, criteria A MTBF 547Khrs min. MIL-HDBK-217F (25) OTHERS DIMENSION 101.6*65.8*23.5mm (L*W*H) 0.16Kg 90pcs/15.8Kg/1.02CUFT PACKING +0 1 2 % / 3 4 5 ( 0 NOTE 0 6 7 -. ( (% + 8 9 0+ 7 : 0 /0 2 4 0 :0 2 % ( * 0 < ( (% /> =/> 0 2 * ( 9 < 0 < 4 < 0A & ( 0 0 ) 50 B : 3 4 % ( 0 2 9 ( % 0 File Name:MPS-30-SPEC 2015-08-06M3 L=6mm 4-3.2 30W Single Output for Medical Type MPS-30 series Mechanical Specification Unit:mm 101.6 66.1 3.2 95.2 4 CN2 3 2 1 5 4 CN1 3 2 1 FUSE*2 T2.5A 250V AC Input Connector (CN1) : Molex 41791-5 or equivalent DC Output Connector (CN2) : Molex 41791-4 or equivalent Pin No. Assignment Mating Housing Terminal Pin No. Assignment Mating Housing Terminal 1 FG 1,2 -V Molex 2139 Molex 2478 or equivalent or equivalent 2,4 No Pin Molex 2139 Molex 2478 3,4 +V or equivalent or equivalent 3 AC/N 5 AC/L : Grounding Required CN1:Pin 1 is safety ground Block Diagram fosc : 100KHz RECTIFIERS RECTIFIERS POWER +V EMI I/P & & SWITCHING FILTER -V FILTER FILTER PWM CONTROL DETECTION FG CIRCUIT CROWBAR OVP Derating Curve Static Characteristics 32 350 100 28 300 80 24 250 60 20 200 16 150 40 12 100 20 8 50 -10 0102030405060 (HORIZONTAL) 60 80 100 120 140 160 180 200 220 240 264 AMBIENT TEMPERATURE () INPUT VOLTAGE (V) 60Hz File Name:MPS-30-SPEC 2015-08-06 LOAD (%) 65.8 62.6 18 23.5 max. 2 max. 51.4 3.2 OUTPUT VOLTAGE (V) OUTPUT RIPPLE (mVp-p)