60W Constant Voltage + Constant Current LED Driver NPF-60 series IP67 2 9 - % > %& - ).41* %( - 1)))) 1 %& () ()*+ , - . %& () -/)0)12+ - 3 4 2 152. 6 /)7 3 5)89:1 - . %( 3 6 - . < 4 2,412, )2, 52,0)2,0(2,5 2,5:2,152 < = - File Name:NPF-60-SPEC 2016-07-0160W Constant Voltage + Constant Current LED Driver NPF-60 series SPECIFICATION MODEL NPF-60-12 NPF-60-15 NPF-60-20 NPF-60-24 NPF-60-30 NPF-60-36 NPF-60-42 NPF-60-48 NPF-60-54 12V 15V 20V 24V 30V 36V 42V 48V 54V DC VOLTAGE 21.6 ~ 36V 25.2 ~ 42V CONSTANT CURRENT REGION Note.2 7.2 ~12V 9 ~ 15V 12 ~ 20V 14.4 ~ 24V 18 ~ 30V 28.8 ~ 48V 32.4 ~ 54V RATED CURRENT 5A 4A 3A 2.5A 2A 1.67A 1.43A 1.25A 1.12A 60W 60W 60W 60W 60W 60.12W 60.06W 60W 60.48W RATED POWER Note.5 200mVp-p 200mVp-p RIPPLE & NOISE (max.) Note.3 150mVp-p 150mVp-p 150mVp-p 150mVp-p 200mVp-p 200mVp-p 350mVp-p OUTPUT 4.0% 4.0% 4.0% 3.0% 3.0% 2.0% 1.0% 1.0% 1.0% VOLTAGE TOLERANCE Note.4 LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION 1.5% 1.0% 1.0% 0.5% 0.5% 0.5% 0.5% SETUP, RISE TIME Note.6 500ms, 80ms 115VAC / 230VAC 16ms/230VAC 16ms/115VAC HOLD UP TIME (Typ.) 90 ~ 305VAC 127 ~ 431VDC VOLTAGE RANGE Note.5 (Please refer toSTATIC CHARACTERISTI section) FREQUENCY RANGE 47 ~ 63Hz PF0.97/115VAC, PF 0.95/230VAC, PF0.92/277VAC full load POWER FACTOR (Please refer toPOWER FACTOR (PF) CHARACTERISTI section) THD< 20%( load60%/115VC,230VAC load 75%/277VAC) TOTAL HARMONIC DISTORTION (Please refer to TOTAL HARMONIC DISTORTION(THD) section) INPUT EFFICIENCY (Typ.) 86% 87% 88% 90% 90% 90% 90% 89% 90% AC CURRENT 0.8A / 115VAC 0.4A / 230VAC 0.32A/277VAC INRUSH CURRENT(Typ.) COLD START 50A(twidth=270 s measured at 50% Ipeak) at 230VAC Per NEMA 410 MAX. No. of PSUs on 16A 8 units (circuit breaker of type B) / 16 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER LEAKAGE CURRENT <0.25mA / 277VAC NO LOAD POWER CONSUMPTION <0.15W 95 ~ 108% OVER CURRENT Constant current limiting, recovers automatically after fault condition is removed Hiccup mode, recovers automatically after fault condition is removed SHORT CIRCUIT PROTECTION 46 ~ 54V 59 ~ 66V 15 ~ 17V 17.5 ~ 21V 23 ~ 27V 28 ~ 34V 34 ~ 40V 41 ~ 46V 54 ~ 60V OVER VOLTAGE Shut down and latch off o/p voltage, re-power on to recover OVER TEMPERATURE Shut down o/p voltage, re-power on to recover WORKING TEMP. Tcase=-40 ~ +85 (Please refer to OUTPUT LOAD vs TEMPERATURE section) MAX. CASE TEMP. Tcase=+85 20 ~ 95% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +80, 10 ~ 95% RH TEMP. COEFFICIENT 0.03%/ (0 ~ 50) VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes UL8750(typeHL), CSA C22.2 No. 250.13-12, ENEC EN61347-1, EN61347-2-13 independent, EN62384, SAFETY STANDARDS Note.8 IP67 approved Design refer to EN60335-1 WITHSTAND VOLTAGE I/P-O/P:3.75KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH EMC EMC EMISSION Note.8 Compliance to EN55015,EN61000-3-2 Class C ( load60%) EN61000-3-3 Compliance to EN61000-4-2,3,4,5,6,8,11 EN61547, light industry level (surge immunity Line-Line 2KV) EMC IMMUNITY MTBF 1178.7K hrs min. Telcordia SR-332 (Bellcore) 367.46Khrs min. MIL-HDBK-217F (25) OTHERS DIMENSION 150*53*35mm (L*W*H) 0.49Kg 30pcs/15.7Kg/1.0CUFT PACKING 4. + - A - - 0)2+ 1 -3 - . NOTE . % B < 2 C A = A& A D B. 0. < E - ) 3 3 4 B - ).4 E 5 . 5. F . 1. - 3 . % = + +<+ < = . (. - - . A ,A&& - - . . - 3 -3 G - . = - 3 3 - G - - - G - . :. - C>4/14).45 C>4/14).4 C>4 50 C>4 ( 1.4 - . % + * . /. - H 1) ))) % 3 1 . 4). % - + * I 3 F,, .- . - File Name:NPF-60-SPEC 2016-07-01