90W Single Output LED Driver NPF-90D series IP67 34 34 34 % & ( ) * + 34 ,- ./ (( ( 0 ( 1 +2 34 ( * ( 5/ 62 ( & 6 76*0 8 9: : & 7 5 < ( * 0 ,- & 8 : ( * = / (( & 34 (* > : : : 7:/ :/,:7 :7<: 76 / (( % ( File Name:NPF-90D-SPEC 2016-07-0190W Single Output LED Driver NPF-90D series SPECIFICASPECIFICATIONTION MODEL NPF-90D-12 NPF-90D-15 NPF-90D-20 NPF-90D-24 NPF-90D-30 NPF-90D-36 NPF-90D-42 NPF-90D-48 NPF-90D-54 RATED CURRENT 7.5A 6A 4.5A 3.75A 3A 2.5A 2.15A 1.88A 1.67A RATED POWER 90W 90W 90W 90W 90W 90W 90.3W 90.24W 90.18W CONSTANT CURRENT REGION 7.2 ~ 12V 9 ~ 15V 12 ~ 20V 14.4 ~ 24V 18 ~ 30V 21.6 ~ 36V 25.2 ~ 42V 28.8 ~ 48V 32.4 ~ 54V OUTPUT 5.0% max. rated current CURRENT RIPPLE 5.0% CURRENT TOLERANCE SET UP TIME Note.3 500ms/115VAC, 230VAC 90 ~ 305VAC 127 ~ 431VDC VOLTAGE RANGE Note.2 (Please refer toSTATIC CHARACTERISTI section) FREQUENCY RANGE 47 ~ 63Hz PF0.98/115VAC, PF 0.96/230VAC, PF0.94/277VAC full load POWER FACTOR (Typ.) (Please refer toPOWER FACTOR (PF) CHARACTERISTI section) THD< 20%( load60%/115VC, 230VAC load 75%/277VAC) TOTAL HARMONIC DISTORTION (Please refer to TOTAL HARMONIC DISTORTION(THD) section) INPUT EFFICIENCY(Typ.) 88% 89% 90% 90% 89% 90% 90% 90% 90% AC CURRENT (Typ.) 0.95A / 115VAC 0.5A / 230VAC 0.4A / 277VAC INRUSH CURRENT(Typ.) COLD START 60A(twidth=550 s measured at 50% Ipeak) at 230VAC Per NEMA 410 MAX. NO. of PSUs on 16A 3 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER LEAKAGE CURRENT <0.25mA / 277VAC STANDBY POWER CONSUMPTION <0.5W 95 ~ 108% OVER CURRENT Constant current limiting, recovers automatically after fault condition is removed Hiccup mode, recovers automatically after fault condition is removed SHORT CIRCUIT PROTECTION 15 ~ 17V 17.5 ~ 21V 28 ~ 34V 34 ~ 40V 41 ~ 46V 46 ~ 54V 54 ~ 60V 59 ~ 66V 23 ~ 27V OVER VOLTAGE Shut down o/p voltage, re-power on to recover Shut down o/p voltage, re-power on to recover OVER TEMPERATURE Tcase=-40 ~ +85 (Please refer to OUTPUT LOAD vs TEMPERATURE section) WORKING TEMP. MAX. CASE TEMP. Tcase=+85 20 ~ 95% RH non-condensing WORKING HUMIDITY ENVIRONMENT -40 ~ +80, 10 ~ 95% RH STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT 0.03%/ (0 ~ 50) VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes UL8750, CSA C22.2 No. 250.13-12, ENEC EN61347-1, EN61347-2-13, EN62384 independent, IP67 approved SAFETY STANDARDS Design refer to EN60335-1 SAFETY & WITHSTAND VOLTAGE I/P-O/P:3.75KVAC EMC ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH EMC EMISSION Compliance to EN55015, EN61000-3-2 Class C ( load60%) EN61000-3-3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11 EN61547, light industry level(surge immunity Line-Line 2KV) MTBF 916.7K hrs min. Telcordia SR-332 (Bellcore) 231.2K hrs min. MIL-HDBK-217F (25) OTHERS DIMENSION 171*63*37.5mm (L*W*H) 0.77Kg 18pcs/14.9Kg/0.82CUFT PACKING *2 ( >0 ( ( / 62 : (& ( * NOTE * ( & * A%020 B2 2 04 %0 C * /*3 ( ( *0 >> ( ( * 7*0 & ( / 62 * *0 ( & (& = ( *% 4 ( & & ( : = ( ( ( = 4 ( * ,*0 ( D * 7:D * :D --7/ D -, * ( * 42 +433 * -*0 ( 1 : 0 : 0 : 3 : & - * <* ( 42 +433E & *( * ( File Name:NPF-90D-SPEC 2016-07-01