30W Single Output LED Power Supply PLC-30 series % & ()*** + , - ,./0 % 1 , )**2 3 4&5 - 6,0 , .. - 789 0 - : 7890 SPECIFICATION MODEL PLC-30-9 PLC-30-12 PLC-30-15 PLC-30-20 PLC-30-24 PLC-30-27 PLC-30-36 PLC-30-48 DC VOLTAGE 9V 12V 15V 20V 24V 27V 36V 48V CONSTANT CURRENT REGION Note.6 6.3 ~ 9V 8.4 ~ 12V 10.5 ~ 15V 14 ~ 20V 16.8 ~ 24V 18.9 ~ 27V 25.2 ~ 36V 33.6 ~ 48V RATED CURRENT 3.3A 2.5A 2A 1.5A 1.25A 1.12A 0.84A 0.63A CURRENT RANGE 0 ~ 3.3A 0 ~ 2.5A 0 ~ 2A 0 ~ 1.5A 0 ~ 1.25A 0 ~ 1.12A 0 ~ 0.84A 0 ~ 0.63A RATED POWER 29.7W 30W 30W 30W 30W 30.24W 30.24W 30.24W RIPPLE & NOISE (max.) Note.2 2.6Vp-p 2Vp-p 2.6Vp-p 2.6Vp-p 2.4Vp-p 2.3Vp-p 3.6Vp-p 3.7Vp-p OUTPUT VOLTAGE ADJ. RANGE Note.5 8.55 ~ 9.9V 11.4 ~ 13.2V 14.5 ~ 16.5V 19 ~ 22V 22.8 ~ 26.4V 25.65 ~ 29.7V 34.2 ~ 39.6V 45.6 ~ 52.8V CURRENT ADJ. RANGE Note.5 2.475 ~ 3.399A 1.875 ~ 2.575A 1.5 ~ 2.06A 1.125 ~ 1.545A 0.938 ~ 1.288A 0.84 ~ 1.1536A 0.63 ~ 0.865A 0.473 ~ 0.649A VOLTAGE TOLERANCE Note.3 10% LINE REGULATION 3.0% LOAD REGULATION 5.0% SETUP TIME 500ms / 230VAC 3000ms / 115VAC at full load VOLTAGE RANGE Note.4 90 ~ 264VAC 127 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.95/115VAC, PF>0.9/230VAC at full load (Please refer toPower Factor Characteristi curve) TOTAL HARMONIC DISTORTION THD< 20% when output loading70% at 115VAC/230VAC input INPUT EFFICIENCY (Typ.) 80% 82.5% 83.5% 84% 84% 84.5% 85% 85.5% AC CURRENT (Typ.) 0.4A/115VAC 0.2A/230VAC INRUSH CURRENT (Typ.) COLD START 35A(twidth=25s measured at 50% Ipeak) at 230VAC MAX. No. of PSUs on 16A 64 units (circuit breaker of type B) / 64 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER LEAKAGE CURRENT <0.5mA / 240VAC 100 ~ 110% OVER CURRENT Protection type : Constant current limiting, recovers automatically after fault condition is removed SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed. 10 ~ 14V 14 ~ 17V 17 ~ 22V 23 ~ 26V 27 ~ 34V 31 ~ 35V 40 ~ 50V 53 ~ 63V PROTECTION OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover Shut down o/p voltage, re-power on to recover OVER TEMPERATURE -30 ~ +50 (Refer toDerating Curv) WORKING TEMP. 20 ~ 95% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +80, 10 ~ 95% RH TEMP. COEFFICIENT 0.06%/ (0 ~ 50) VIBRATION 10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes SAFETY STANDARDS UL1310, TUV EN61347-1, EN61347-2-13, GB19510.14,GB19510.1, CAN/CSA C22.2 No. 223-M91(except for 48V), J61347-1, J61347-2-13 approved WITHSTAND VOLTAGE I/P-O/P:3.75KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH EMC EMC EMISSION Compliance to EN55015, GB17743, GB17625.1,EN61000-3-2 Class C (Pin25W), Class D (>70% load) EN61000-3-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61547, light industry level, criteria A EMC IMMUNITY MTBF 625.5Khrs min. MIL-HDBK-217F (25) OTHERS DIMENSION 160*46*30mm (L*W*H) 0.2Kg 70pcs/15Kg/0.96CUFT PACKING )6 ,+*9 % ,. 6 NOTE ,6< = ,*>3 ), *6) =7A 6 +6 % 6 765 6 6 .6 9<) B 9<, 6 (6 5< 9 1>& 3 5 4&5> 5 4& 6 A6 C 6 &> % C C &> 5 6 865 4&5 % 6 D6 C & : % 4&5 6 File Name:PLC-30-SPEC 2015-11-0230W Single Output LED Power Supply PLC-30 series Mechanical Specification Case No. 990A Unit:mm 160 3.2 2-R22-R2 2-R6.5 Tcase 80 1 Vo Io 2 ADJ ADJ 3.2 1 T case: Max. Case Temperature. 2 Terminal Pin No. Assignment (TB1) : Terminal Pin No. Assignment (TB2) : SWITCHLAB MB310-75002 SWITCHLAB MB310-75002 Pin No. Assignment Pin No. Assignment 11AC/N +V 22AC/L -V Block Diagram fosc : 39KHz(115VAC) 53KHz(230VAC) RECTIFIERS EMI FILTER POWER +V I/P & & SWITCHING -V RECTIFIERS FILTER DETECTION CIRCUIT O.L.P. PWM & PFC CONTROL O.C.P. O.V.P. DeratingDerating Curve Curve Static Characteristics 100 100100 90 8080 80 70 6060 60 4040 50 2020 40 -30 -25-25 -5-5 00 1155 3300 40 50 60 90 100 125 135 145 155 165 175 180 200 230 264 AMBIENT TEMPERATURE () INPUT VOLTAGE (V) 60Hz File Name:PLC-30-SPEC 2015-11-02 LOADLOADLOAD (%) (%) (%) 30 46 9 23 LOAD (%) 2.3 9