60W Single Output LED Power Supply PL D-60 serie s Users Manual IS 15885(Part 2/Sec13) THOMAS SAMUEL THOMAS SAMUEL R-41027766 I P 4 2 ( for 700B,1050B,1400B only) SPECIFICATION MODEL PLD-60-500B PLD-60-700B PLD-60-1050B PLD-60-1400B PLD-60-1750B PLD-60-2000B PLD-60-2400B RATED CURRENT 500mA 700mA 1050mA 1400mA 1750mA 2000mA 2400mA OPERATING VOLTAGE RANGE 70 ~ 108V 50 ~ 86V 34 ~ 57V 25 ~ 43V 20 ~ 34V 18 ~ 30V 15 ~ 25V CURRENT ACCURACY 5.0% OUTPUT RATED POWER 54W 60.2W 59.85W 60.2W 59.5W 60W 60W RIPPLE & NOISE (max.) Note.1 10.2Vp-p 5.6Vp-p 3.8Vp-p 3.4Vp-p 3.3Vp-p 2.4Vp-p 2.4Vp-p NO LOAD OUTPUT VOLTAGE (max.) 118V 100V 63V 50V 50V 35V 35V SETUP TIME 500ms / 230VAC at full load VOLTAGE RANGE 180~295VAC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.9/230VAC, PF>0.9/277VAC at full load (Please refer toPower Factor Characteristi curve) TOTAL HARMONIC DISTORTION THD< 20% when output loading60%(PLD-60-500B loading65%)at 230VAC input and output loading75% at 277VAC input INPUT EFFICIENCY (Typ.) 88% 87% 87% 86% 86% 86% 86% AC CURRENT (Typ.) 0.6A/230VAC 0.5A/277VAC INRUSH CURRENT(Typ.) COLD START 25A (twidth=60s measured at 50% Ipeak) at 230VAC MAX. No. of PSUs on 16A 32 units (circuit breaker of type B) / 32 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER LEAKAGE CURRENT <0.5mA / 240VAC SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed. PROTECTION OVER TEMPERATURE Shut down o/p voltage, auto-recovery -30 ~ +45 (Refer toDerating Curv) WORKING TEMP. 20 ~ 95% RH non-condensing WORKING HUMIDITY STORAGE TEMP., HUMIDITY -40 ~ +80, 10 ~ 95% RH ENVIRONMENT TEMP. COEFFICIENT 0.03%/ (0 ~ 50) VIBRATION 10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes ENEC BS EN/EN61347-1, BS EN/EN61347-2-13 independent, BS EN/EN62384, BIS IS15885(for 700B,1050B,1400B only), SAFETY STANDARDS EAC TP TC 004, IP42 approved WITHSTAND VOLTAGE I/P-O/P:3.75KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH EMC EMC EMISSION Compliance to BS EN/EN55015, BS EN/EN61000-3-2 Class C BS EN/EN61000-3-3, EAC TP TC 020 EMC IMMUNITY Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN61547, light industry level(Surge 2KV), criteria B, EAC TP TC 020 MTBF 458.852Khrs min. MIL-HDBK-217F (25) 128*60*31.5mm (L*W*H) OTHERS DIMENSION 0.34Kg 30pcs/11.2Kg/0.58CUFT PACKING NOTE Product Liability DisclaimerFor detailed information, please refer to 60W Single Output LED Power Supply PLD-60 series Mechanical Specification Case No. Unit:mm 3 128 15010 UL1430 18AWG V+(RED) V-(BLACK) 7.3 7.3 755 Tcase 2 AC/N(BLUE) H03VVH2-F 0.75mm X2C 10 AC/L(BROWN) 3 T case: Max. Case Temperature. Block Diagram fosc :60KHz(230VAC) RECTIFIERS EMI FILTER POWER +V I/P & & SWITCHING -V RECTIFIERS FILTER DETECTION CIRCUIT O.L.P. PWM & PFC CONTROL O.C.P. Derating Curve Static Characteristics 100 100 90 80 80 70 60 50 60 40 50 20 40 (HORIZONTAL) -30 -25 -5 0 15 30 40 45 50 60 180 295 INPUT VOLTAGE (V) AMBIENT TEMPERATURE () File Name:PLD-60-SPEC 2021-09-10 2-8.9 2-3.6 LOAD (%) 15.3 60 20 15.3 LOAD (%) 1.9 31.5