PLM-40-700 Mean Well

40W Single Output LED Power Supply PLM-40 series IP30 / & 012 % 012 % 012 % 012 % % & ( ) * + , - . % ( 03 4 4 - 52 012 , & ( 03 4 % % % , , & ( % % , -( % % ( 03 4 % % 1 6 1 7 % 8 , 03 4 % ) % % % 70 4 ,9% I5: % / % % ,9 % 03 4 ( % % < ( 03 4 1 ( % % = < ,9% % ( % % ( (> ( ( 4 > ( , : / < 1 = < : File Name:PLM-40-SPEC 2016-03-1440W Single Output LED Power Supply PLM-40 series SPECIFICATION MODEL PLM-40 -350 PLM-40 -500 PLM-40 -700 PLM-40 -1050 PLM-40 -1400 PLM-40 -1750 RATED CURRENT 350mA 500mA 700mA 1050mA 1400mA 1750mA OPERATING VOLTAGE RANGE Note.5 53 ~ 105V 40 ~ 80V 29 ~ 57V 19 ~ 38V 15 ~ 29V 12 ~ 23V CURRENT ACCURACY Note.3 8.0% RATED POWER 36.75W 40W 39.9W 39.9W 40.6W 40.25W OUTPUT RIPPLE & NOISE (max.) Note.2 10Vp-p 8Vp-p 6Vp-p 4Vp-p 3Vp-p 2.5Vp-p 115V 86V 63V 43V 34V 27V NO LOAD OUTPUT VOLTAGE (max.) SETUP TIME Blank Type: 500ms /115VAC, 230VAC at full load E Type: 500ms / 230VAC at full load Blank Type: 110 ~ 295VAC 156 ~ 417VDC E Type: 180 ~ 295VAC 254 ~ 417VDC VOLTAGE RANGE Note.4 FREQUENCY RANGE 47 ~ 63Hz Blank type PF0.97/115VAC,PF 0.95/230VAC,PF>0.9/277VAC(at full load)(Please refer toPower Factor Characteristi curve) POWER FACTOR (Typ.) PF0.95/230VAC,PF>0.9/277VAC(at full load)(Please refer toPower Factor Characteristi curve) E type Blank type THD< 20% when output loading60% at 115VAC/230VAC input and output loading 75% at 277VAC input TOTAL HARMONIC INPUT DISTORTION E type THD< 20% when output loading60% at 230VAC input and output loading 75% at 277VAC input EFFICIENCY (Typ.) 88% 88% 87% 87% 86% 86% AC CURRENT (Typ.) Blank Type: 0.5A/115VAC 0.3A/230VAC 0.25A/277VAC E Type: 0.3A/230VAC 0.25A/277VAC INRUSH CURRENT(Typ.) COLD START 15A(twidth=75s measured at 50% Ipeak) at 230VAC MAX. No. of PSUs on 16A 47 units (circuit breaker of type B) / 47 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER <0.5mA / 240VAC LEAKAGE CURRENT Hiccup mode, recovers automatically after fault condition is removed. SHORT CIRCUIT PROTECTION OVER TEMPERATURE Hiccup mode, recovers automatically after temperature goes down. -30 ~ +40 (Refer toDerating Curv) WORKING TEMP. 20 ~ 95% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +80, 10 ~ 95% RH TEMP. COEFFICIENT 0.06%/ (0 ~ 40) VIBRATION 10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes SAFETY STANDARDS UL8750, CSA C22.2 No. 250.13-12 ENEC EN61347-1, EN61347-2-13, EN62384,GB19510.14,GB19510.1,IP30 approved WITHSTAND VOLTAGE I/P-O/P:3.75KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH EMC EMC EMISSION Compliance to EN55015, GB17743, GB17625.1,EN61000-3-2 Class C (75% load) EN61000-3-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, light industry level, criteria B (Surge 2KV) EMC IMMUNITY MTBF 822.7Khrs min. MIL-HDBK-217F (25) OTHERS DIMENSION 175*42*24mm (L*W*H) 0.175Kg 60pcs/11.5kg/0.68CUFT PACKING , *:9 ( , NOTE , A 3.B % C % , A 4> , , , % , 4, 2 ( % / % % , , % D < D , 9% % 012 ( 6 , E, 9% % % 6 , 13 % ( % 6 6 13 2 % , >, 2 012 ( , File Name:PLM-40-SPEC 2016-03-14