5W Output Switching Power Supply PM -05 series SPECIFICATION MODEL PM-05-3.3 PM-05-5 PM-05-12 PM-05-15 PM-05-24 DC VOLTAGE 3.3V 5V 12V 15V 24V RATED CURRENT 1.25A 1A 0.42A 0.33A 0.23A CURRENT RANGE 0 ~ 1.25A 0 ~ 1A 0 ~ 0.42A 0 ~ 0.33A 0 ~ 0.23A RATED POWER 4.125W 5W 5.04W 4.95W 5.52W RIPPLE & NOISE (max.) Note.2 80mVp-p 80mVp-p 150mVp-p 150mVp-p 240mVp-p OUTPUT VOLTAGE TOLERANCE Note.3 3.0% 2.0% 2.0% 2.0% 2.0% LINE REGULATION 1.0% 1.0% 0.5% 0.5% 0.5% LOAD REGULATION 1.0% 1.0% 1.0% 1.0% 0.5% SETUP, RISE TIME 1000ms, 20ms/230VAC 1000ms, 20ms/115VAC at full load HOLD UP TIME (Typ.) 100ms/230VAC 24ms/115VAC at full load VOLTAGE RANGE 85 ~ 264VAC 120 ~ 370VDC FREQUENCY RANGE 47 ~ 440Hz EFFICIENCY (Typ.) 67% 71% 73% 74% 76% INPUT AC CURRENT (Typ.) 0.12A/115VAC 0.08A/230VAC INRUSH CURRENT (Typ.) COLD START 25A/115VAC 45A/230VAC LEAKAGE CURRENT Note.5 Touch current < 80 A/264VAC Above 105% rated output power OVERLOAD Protection type : Hiccup mode, recovers automatically after fault condition is removed PROTECTION 13.8 ~ 16.2V 17.25 ~ 20.25V 27.6 ~ 32.4V 3.8 ~ 4.95V 5.75 ~ 6.75V OVER VOLTAGE Protection type : Shut off o/p voltage, clamping by zener diode WORKING TEMP. -20 ~ +70 (Refer toDerating Curv) 20 ~ 90% RH non-condensing WORKING HUMIDITY STORAGE TEMP., HUMIDITY -40 ~ +85, 10 ~ 95% RH ENVIRONMENT TEMP. COEFFICIENT 0.03%/ (0 ~ 50) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes SAFETY STANDARDS ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1 approved ISOLATION LEVEL Primary-Secondary: 2xMOPP SAFETY & WITHSTAND VOLTAGE I/P-O/P:4KVAC EMC (Note 4) ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH EMC EMISSION Compliance to EN55011(CISPR11),EN55022 (CISPR22) Class B, EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN60601-1-2, EN61204-3, medical level, criteria A EMC IMMUNITY MTBF 1513.4Khrs min. MIL-HDBK-217F (25) OTHERS DIMENSION 62.85*50*19.7mm (L*W*H) 0.085Kg 120pcs/11.2Kg/0.97CUFT PACKING NOTE File Name:PM-05-SPEC 2014-12-095W Output Switching Power Supply PM -05 series Mechanical Specification Case No. 948A Unit:inch(mm) 1.97 (50mm) 0.295 (7.5mm) 0.689 (17.5mm) 0.776 (19.7mm) AC/N AC/L BOTTOM VIEW 0.138 (3.51mm) -V +V 0.789 (20.04mm) 0.59 (15mm) Block Diagram fosc : 67KHz RECTIFIERS RECTIFIERS POWER +V EMI I/P & & SWITCHING FILTER -V FILTER FILTER PWM DETECTION CONTROL CIRCUIT Derating Curve Output Derating VS Input Voltage 100 100 90 80 80 70 60 60 40 50 20 40 -20 0 10 20 30 40 50 60 70 (HORIZONTAL) 85 95 100 115 120 140 160 180 200 220 240 264 AMBIENT TEMPERATURE () INPUT VOLTAGE (VAC) 60Hz File Name:PM-05-SPEC 2014-12-09 LOAD (%) 2.475 (62.85mm) 1.85 (47mm) 0.306 (7.8mm) LOAD (%) 0.041 (1.05mm)