100W Single Output DC-DC Converter SD-100 series SPECIFICATION MODEL SD-100A-5 SD-100B-5 SD-100C-5 SD-100D-5 SD-100A-12 SD-100B-12 SD-100C-12 SD-100D-12 SD-100A-24 SD-100B-24 SD-100C-24 SD-100D-24 DC VOLTAGE 5V 12V 24V RATED CURRENT 18A 20A 8.5A 4.2A CURRENT RANGE 0 ~ 18A 0 ~ 20A 0 ~ 8.5A 0 ~ 4.2A RATED POWER 90W 100W 102W 100.8W RIPPLE & NOISE (max.) Note.2 100mVp-p 120mVp-p 150mVp-p OUTPUT VOLTAGE ADJ. RANGE 4.5 ~ 5.5VDC 11 ~ 16VDC 23 ~ 30VDC VOLTAGE TOLERANCE Note.3 2.0% 1.0% 1.0% LINE REGULATION 0.5% 0.3% 0.2% LOAD REGULATION 0.5% 0.3% 0.2% SETUP, RISE TIME 2s, 50ms(only D mode) at full load HOLD UP TIME (Typ.) 20ms(only D mode) at full load VOLTAGE RANGE A:9.5 ~ 18VDC B:19 ~ 36VDC C:36 ~ 72VDC D:72 ~ 144VDC or 85 ~ 132VAC EFFICIENCY (Typ.) 78% 74% 75% 76% 82% 75% 77% 80% 84% 78% 81% 83% DC CURRENT (Typ.) 9.7A/12V 4.8A/24V 2.4A/48V 1.8A/96V 10.4A/12V 4.8A/24V 2.4A/48V 1.8A/96V 10A/12V 4.8A/24V 2.4A/48V 1.8A/96V INPUT INRUSH CURRENT (Typ.) D:18A/96VDC LEAKAGE CURRENT <0.75mA/120VAC(SD-100D) 105 ~ 135% rated output power OVERLOAD Protection type : Hiccup mode, recovers automatically after fault condition is removed PROTECTION 31.5 ~ 37.5V 5.75 ~ 6.75V/10% load 16.8 ~ 20V/10% load 31.5 ~ 37.5V/10% load 5% load OVER VOLTAGE Protection type : Hiccup mode, recovers automatically after fault condition is removed -15 ~ +60(SD-100A), -10 ~ +60(SD-100B/C/D) (Refer toDerating Curv) WORKING TEMP. 20 ~ 90% RH non-condensing WORKING HUMIDITY STORAGE TEMP., HUMIDITY -20 ~ +85, 10 ~ 95% RH non-condensing ENVIRONMENT TEMP. COEFFICIENT 0.03%/ (0 ~ 50) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS IEC60950-1 CB approved by TUV (for D type only) WITHSTAND VOLTAGE I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH EMC (Note 4) EMC EMISSION Compliance to EN55032 (CISPR32) Class B EMC IMMUNITY Compliance to EN61000-4-2,3,4,6,8, light industry level, criteria A MTBF 399.9K hrs min.(SD-100A) 356.7K hrs min.(SD-100B) 355.5K hrs min.(SD-100C) 341.9K Hrs min.(SD-100D) MIL-HDBK-217F (25) OTHERS DIMENSION 199*98*38mm (L*W*H) 0.65Kg 20pcs/13.8Kg/0.8CUFT PACKING NOTE File Name:SD-100-SPEC 2017-06-233.5 3.5 3-M3 100W Single Output DC-DC Converter SD-100 series Mechanical Specification Case No. 902 Unit:mm 197 1 2 3 4 5 6 7 57.5 120 4.5 199 6.5 190 22 157 Terminal Pin No. Assignment Pin No. Assignment Pin No. Assignment 1,2 INPUT 4,5 DC OUTPUT -V 3 6,7 DC OUTPUT +V FG SD-100A,B,C SD-100D Pin No. Assignment Pin No. Assignment 1 DC INPUT V+ 1,2 AC/DC INPUT 2 DC INPUT V- Block Diagram fosc : 83KHz A-type : 65KHz RECTIFIERS RECTIFIERS EMI POWER +V I/P & & FILTER SWITCHING -V FILTER FILTER FG DETECTION PWM CIRCUIT O.L.P. CONTROL O.V.P. File Name:SD-100-SPEC 2017-06-23 4-M3 9 8.2 9.5 12 18 80 9 18 9.5 3.5 3.5 28.5 85.5 7 38 98