SE-600-48 Mean Well

600W Single Output Power Supply SE-600 series 2 - . ( ( ( & / -0 1 . 1 ( 1 . 2 ( * 3 ( & + 4&1 5 * 67 . 7 & & SPECIFICATION MODEL SE-600-12 SE-600-24 SE-600-27 SE-600-5 SE-600-15 SE-600-36 SE-600-48 DC VOLTAGE 5V 12V 15V 24V 27V 48V 36V RATED CURRENT 100A 50A 40A 25A 22.2A 12.5A 16.6A 0 ~ 22.2A CURRENT RANGE 0 ~ 100A 0 ~ 50A 0 ~ 40A 0 ~ 25A 0 ~ 12.5A 0 ~ 16.6A RATED POWER 500W 600W 600W 600W 599.4W 600W 597.6W RIPPLE & NOISE (max.) Note.2 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 200mVp-p 200mVp-p 24 ~ 30V OUTPUT VOLTAGE ADJ. RANGE 4.75 ~ 5.5V 10 ~ 13.5V 13.5 ~ 16.5V 22 ~ 26.4V 43 ~ 56V 32 ~ 40V VOLTAGE TOLERANCE Note.3 2.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION 2.0% 0.5% 0.5% 0.5% 0.5% 0.5% SETUP, RISE TIME 1000ms, 50ms/230VAC 1000ms, 50ms/115VAC at full load HOLD UP TIME (Typ.) 20ms/230VAC 16ms/115VAC at full load VOLTAGE RANGE 90 ~ 132VAC / 180 ~ 264VAC selected by switch 254 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 78% 83% 84% 87% 87% 87% 88% INPUT AC CURRENT (Typ.) 12A/115VAC 7.5A/230VAC INRUSH CURRENT (Typ.) 30A/115VAC 60A/230VAC LEAKAGE CURRENT <2.0mA / 240VAC 105 ~ 125% rated output power OVERLOAD Protection type : Shut down o/p voltage, re-power on to recover 42 ~ 50V 57.6 ~ 67.2V 5.75 ~ 6.3V 13.8 ~ 16.2V 18 ~ 21V 27.6 ~ 32.4V 31 ~ 36.5V PROTECTION OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover 855 (TSW1) detect on heatsink of power transistor OVER TEMPERATURE Protection type : Shut down o/p voltage, recovers automatically after temperature goes down -20 ~ +60 (Refer to output load derating curve) WORKING TEMP. 20 ~ 90% RH non-condensing WORKING HUMIDITY -40 ~ +85, 10 ~ 95% RH ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT 0.05%/ (0 ~ 50) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS UL60950-1 approved SAFETY & WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC EMC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC MTBF 197K hrs min. MIL-HDBK-217F (25) OTHERS DIMENSION 247*127*63.5mm (L*W*H) 2.1Kg 6pcs/13.4Kg/1.03CUFT PACKING NOTE % & ( ) & *& & +, - ( ( File Name:SE-600-SPEC 2009-05-13600W Single Output Power Supply SE-600 series Mechanical Specification Case No. 926A Unit:mm 14 max. 17 max. 4-M3 L=4 11 220 247 1 Air flow 2 direction 3 O/P 4 5 1 6 2 I/P CN4 +Adj. 3 - - RS RS+ + 220 16 4-M3 L=4 AC input terminal : DC Output terminal : RS Connector (CN4) : JST B-XH or equivalent Pin No. Assignment Pin No. Assignment Pin No. Assignment Mating Housing Terminal 1 AC/L 1~3 +V 1 +S JST XHP JST SXH-001T or equivalent or equivalent 2 AC/N 4~6 -V 2 -S 3 FG Block Diagram fosc : 68KHz RECTIFIERS RECTIFIERS POWER EMI +V I/P & & FILTER SWITCHING -V FILTER FILTER DETECTION FG CIRCUIT O.L.P. PWM O.T.P. CONTROL O.V.P. Derating Curve Static Characteristics 100 100 90 80 80 70 60 60 40 50 20 40 -20 010203040506070 (HORIZONTAL) 90 95 100 115 130 180 190 200 230 260 AMBIENT TEMPERATURE () INPUT VOLTAGE (VAC) 60Hz File Name:SE-600-SPEC 2009-05-13 Other 5V LOAD (%) 230/115VAC 10 8.2 LOAD (%) 20 30 10 13 30 20 127 63.5