50W linear LED Driver SL D-50 series / File Name:SLD-50-SPEC 2019-11-1350W Constant Voltage+Constant Current LED Driver SL D- 5 0 s e ri e s SPECIFICATION MODEL SLD-50-12 SLD-50-24 DC VOLTAGE 12V 24V CONSTANT CURRENT REGION Note.2 8.4 ~12V 16.8 ~24V RATED CURRENT 4.2A 2.1A RATED POWER Note.5 50.4W 50.4W 150mVp-p 240mVp-p RIPPLE & NOISE (max.) Note.3 OUTPUT VOLTAGE TOLERANCE Note.4 4.0% 3.0% LINE REGULATION 0.5% 0.5% 1.5% 0.5% LOAD REGULATION 500ms, 80ms 115VAC / 230VAC SETUP, RISE TIME Note.6 HOLD UP TIME (Typ.) 10ms/230VAC 10ms/115VAC 110 ~ 305VAC 155 ~ 431VDC VOLTAGE RANGE Note.5 (Please refer toSTATIC CHARACTERISTI section) FREQUENCY RANGE 47 ~ 63Hz PF0.97/115VAC, PF0.95/230VAC, PF0.92/277VAC full load POWER FACTOR (Please refer toPOWER FACTOR (PF) CHARACTERISTI section) THD< 10%( load60%/115VC,230VAC load75%/277VAC) TOTAL HARMONIC DISTORTION (Please refer to TOTAL HARMONIC DISTORTION(THD) section) INPUT EFFICIENCY (Typ.) 88% 90% AC CURRENT 0.6A / 115VAC 0.3A / 230VAC 0.25A/277VAC INRUSH CURRENT(Typ.) COLD START 50A(twidth=270s measured at 50% Ipeak) at 230VAC Per NEMA 410 MAX. No. of PSUs on 16A 8 units (circuit breaker of type B) / 16 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER LEAKAGE CURRENT <0.25mA / 277VAC NO LOAD POWER CONSUMPTION <0.5W 95 ~ 108% OVER CURRENT Constant current limiting or Hiccup mode, recovers automatically after fault condition is removed Hiccup mode, recovers automatically after fault condition is removed SHORT CIRCUIT PROTECTION 14 ~ 17V 28 ~ 34V OVER VOLTAGE Shut down and latch off o/p voltage, re-power on to recover OVER TEMPERATURE Shut down output voltage, re-power on to recover WORKING TEMP. Tcase=-20 ~ +90 (Please refer to OUTPUT LOAD vs TEMPERATURE section) MAX. CASE TEMP. Tcase=+90 20 ~ 95% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +80, 10 ~ 95% RH TEMP. COEFFICIENT 0.03%/ (0 ~ 50) VIBRATION 10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes UL8750(typeHL),CSA C22.2 No. 250.13-12, ENEC EN61347-1, EN61347-2-13 independent, EN62384, SAFETY STANDARDS EAC TP TC 004, GB19510.1,GB19510.14 WITHSTAND VOLTAGE I/P-O/P:3.75KVAC ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH Parameter Standard Test Level / Note Conducted EN55015(CISPR15) ,GB/T17743 ----- Radiated EMC EMISSION EN55015(CISPR15) ,GB/T17743 ----- Harmonic Current EN61000-3-2,GB/T17625.1 Class C load60% SAFETY & Voltage Flicker EN61000-3-3 ----- EMC EN61547 Parameter Standard Test Level / Note ESD EN61000-4-2 Level 3, 8KV air Level 2, 4KV contact Radiated EN61000-4-3 Level 2 EFT / Burst EN61000-4-4 Level 2 EMC IMMUNITY Surge EN61000-4-5 1KV/Line-Line Conducted EN61000-4-6 Level 2 Magnetic Field EN61000-4-8 Level 2 >95% dip 0.5 periods, 30% dip 25 periods, Voltage Dips and Interruptions EN61000-4-11 >95% interruptions 250 periods MTBF 1304.51K hrs min. Telcordia SR-332 (Bellcore) 362.82K hrs min. MIL-HDBK-217F (25) 280*30*16.8mm (L*W*H) OTHERS DIMENSION 0.175Kg 64pcs/12.4Kg/ 0.67CUFT PACKING NOTE File Name:SLD-50-SPEC 2019-11-13