1W DC-DC Unregulated Single Output Converter SM U01 series Features : 1500VDC I/O isolation 3000VDC I/O isolation(optional) Operating temperature range of -40 ~ +85 without derating Internal SMD technology Built-in EMI filter Cooling by free air convection Non-conductive plastic case SIP packge Industry standard pinout 100% burn-in test Low cost / High reliability 2 years warranty SELECTION GUIDE ORDER NO. SMU01L-05 SMU01M-05 SMU01N-05 SMU01L-09 SMU01M-09 SMU01N-09 DC OUTPUT VOLTAGE 5V 9V OUTPUT CURRENT RANGE 0 ~ 200mA 0 ~ 110mA EFFICIENCY(Typ.) 77% 79% 78% 77% 79% 76% ORDER NO. SMU01L-12 SMU01M-12 SMU01N-12 SMU01L-15 SMU01M-15 SMU01N-15 15V DC OUTPUT VOLTAGE 12V 0 ~ 67mA OUTPUT CURRENT RANGE 0 ~ 84mA 78% 80% 77% 78% 80% 77% EFFICIENCY(Typ.) SPECIFICATION RATED POWER 1W RIPPLE & NOISE (max.) Note.2 100mVp-p LINE REGULATION Note.3 1.2% for 1% input variation OUTPUT LOAD REGULATION Note.4 8.0% VOLTAGE ACCURACY 2.0% SWITCHING FREQUENCY(Typ.) 100KHz VOLTAGE RANGE 4.5 ~ 5.5V 10.8 ~ 13.2V 21.6 ~ 26.4V 4.5 ~ 5.5V 10.8 ~ 13.2V 21.6 ~ 26.4V NORMAL VOLTAGE 5V 12V 24V 5V 12V 24V Full load 265mA 110mA 57mA 265mA 110mA 57mA INPUT CURRENT INPUT 32mA 15mA 11mA 32mA 15mA 11mA No load PROTECTION (FUSE RECOMMENDED) 500mA 250mA 150mA 500mA 250mA 150mA FILTER Capacitor type Momentary OVERLOAD Protection type : Broken PROTECTION Momentary SHORT CIRCUIT Protection type : Broken WORKING TEMP. -40 ~ +90 (Refer to output load derating curve) WORKING HUMIDITY 20% ~ 90% RH non-condensing STORAGE TEMP., HUMIDITY -55 ~ +125 , 10 ~ 95% RH ENVIRONMENT TEMP. COEFFICIENT 0.05% / (0 ~ 50 ) VIBRATION 10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes WITHSTAND VOLTAGE I/P-O/P:1.5KVDC ISOLATION RESISTANCE I/P-O/P: 100M Ohms / 500VDC / 25 / 70% RH SAFETY & ISOLATION CAPACITANCE 80pF max. EMC EMI RADIATION Compliance to EN55022 Class B, FCC part 15 Class B Compliance to EN61000-4-2,3,4,5,6,8 light industry level, criteria A EMS IMMUNITY 700khrs min. MIL-HDBK-217F(25 ) MTBF OTHERS DIMENSION (L*W*H) 11.6*6.1*10.14mm or 0.46 *0.24 *0.40 inch for 5V,12V input 11.6*7.4*10.14mm or 0.46 *0.29 *0.40 inch for 24V input 1.3g WEIGHT Pin Configuration Derating Curve Mechanical Specification Unit: mm (inch) 11.6 (0.46) Output Pin No. 100 1 -Vin 1.2 (0.05) FRONT 1 2 3 4 2 +Vin VIEW -Vout 3 50 4 +Vout BOTT ON VIEW 3.81 (0.15) 2.54 (0.10) -40 0 20 40 60 85 90 100 Ta ( ) 1.All parameters are specified at normal input, rated load, 25 70% RH ambient. NOTE 2.Ripple & noise are measured at 20MHz by using a 12 twisted pair terminated with a 0.1uf & 47uf capacitor. 3.Line regulation is measured from low line to high line at rated load. 4.Load regulation is measured from 20% to 100% rated load. File Name: SMU01-SPEC 2009-10-12 10.14 (0.40) 6.10 (0.24) LOAD (%)