3W DC-DC Unregulated Single Output Converter SPU0 3 se rie s Features : E3000VDC I/O isolation EInternal SMD technology EBuilt-in EMI filter EProtection: Short circuit ECooling by free air convection ENon-conductive plastic case ESingle in line package E100% full load burn-in test ELow cost / High reliability E2 years warranty SPECIFICATION ORDER NO. SPU03L-05 SPU03M-05 SPU03N-05 SPU03L-12 SPU03M-12 SPU03N-12 SPU03L-15 SPU03M-15 SPU03N-15 DC OUTPUT VOLTAGE 5V 12V 15V 60 ~ 600mA 25 ~ 250mA 20 ~ 200mA CURRENT RANGE EFFICIENCY (Typ.) 82% 83% 83% 85% 86% 86% 86% 86% 88% RATED POWER 3W OUTPUT RIPPLE & NOISE (max.) Note.2 50mVp-p LINE REGULATION Note.3 1.2% for 1% input variation LOAD REGULATION Note.4 8.0% VOLTAGE ACCURACY 2.0% SWITCHING FREQUENCY 60KHz min. VOLTAGE RANGE 4.5 ~ 5.5V 10.8 ~ 13.2V 21.6 ~ 26.4V 4.5 ~ 5.5V 10.8 ~ 13.2V 21.6 ~ 26.4V 4.5 ~ 5.5V 10.8 ~ 13.2V 21.6 ~ 26.4V NORMAL VOLTAGE 5V 12V 24V 5V 12V 24V 5V 12V 24V 740mA 305mA 155mA 715mA 300mA 150mA 705mA 300mA 145mA Full load INPUT INPUT CURRENT No load 60mA 25mA 15mA 65mA 25mA 15mA 65mA 30mA 15mA Capacitor type FILTER PROTECTION Fuse recommended Momentary OVERLOAD Protection type : Broken PROTECTION Momentary SHORT CIRCUIT Protection type : Broken WORKING TEMP. -40 ~ +90J (Refer toDerating Curv) WORKING HUMIDITY 20% ~ 90% RH non-condensing STORAGE TEMP., HUMIDITY -40 ~ +105J, 10 ~ 95% RH ENVIRONMENT 0.03% /J (0 ~ 50J) TEMP. COEFFICIENT VIBRATION 10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes WITHSTAND VOLTAGE I/P-O/P:3KVDC ISOLATION RESISTANCE I/P-O/P: 100M Ohms / 500VDC / 25J/ 70% RH SAFETY & ISOLATION CAPACITANCE 80pF max. EMC Compliance to EN55022 Class B, FCC part 15 Class B EMC EMISSION Compliance to EN61000-4-2,3,4,5,6,8, light industry level, criteria A EMC IMMUNITY MTBF 700khrs min. MIL-HDBK-217F(25J) OTHERS DIMENSION 19.6*7.5*10.2mm or 0.77 *0.30 *0.40 inch (L*W*H) 2.9g WEIGHT Pin Configuration Derating Curve Mechanical Specification Unit: mm (inch) 19.6 (0.77) Pin No. Output 100 3.81 (0.15) 1 +Vin FRONT VIEW Others 2 -Vin 5 -Vout 50 5.08 (0.20) 0.5 (0.02) 7 +Vout 5V 7.5 (0.3) 1 2 5 7 BOTTOM VIEW 1.2 (0.05) -40 0 50 75 85 100 NOTE:Pin size tolerance 0.50 0.30mm 0.05mm Ta (J) 2.54 (0.10) 1.All parameters are specified at normal input, rated load, 25J 70% RH ambient. NOTE 2.Ripple & noise are measured at 20MHz by using a 12 twisted pair terminated with a 0.1uf & 47uf capacitor. 3.Line regulation is measured from low line to high line at rated load. 4.Load regulation is measured from 20% to 100% rated load. File Name: SPU03-SPEC 2012-07-18 10.20 (0.40) LOAD (%)