1000W True Sine Wave DC-AC Power Inverter TS-1000 s e ri e s Features : True sine wave output (THD<3%) High surge power up to 2000W High efficiency up to 92% Power ON-OFF switch Standby saving mode can be selected Front panel indicator for operation status Built-in fan ON-OFF control function Protections: Bat. low alarm / Bat. low shutdown / Over voltage / Over temp. / Output short / Input reverse polarity / Overload Application : Home appliance, power tools, office and portable equipment, vehicle and yacht ...etc. 2 years warranty 13 E SPECIFICATION MODEL TS-1000-112 TS-1000-124 TS-1000-148 TS-1000-212 TS-1000-224 TS-1000-248 RATED POWER (Typ.) 1000W MAXIMUM OUTPUT POWER (Typ.) 1150W for 180 sec. / 1500W for 10 sec. / surge power 2000W for 30 cycles Factory setting set at 110VAC Factory setting set at 230VAC AC VOLTAGE 100 / 110 / 115 / 120VAC selectable by setting button S.W 200 / 220 / 230 / 240VAC selectable by setting button S.W OUTPUT FREQUENCY 60 0.1Hz 50/60Hz selectable by setting button S.W 50 0.1%Hz 50/60Hz selectable by setting button S.W WAVEFORM True sine wave (THD<3%) at rated input voltage AC REGULATION (Typ.) 3.0% SAVING MODE (Typ.) Load 5W will be changed to standby mode FRONT PANEL INDICATOR Battery voltage level, output load level, saving mode, fault and operation status BAT. VOLTAGE 12V 24V 48V 12V 24V 48V VOLTAGE RANGE (Typ.) 10.5 ~ 15VDC 21 ~ 30VDC 42 ~ 60VDC 10.5 ~ 15VDC 21 ~ 30VDC 42 ~ 60VDC DC CURRENT (Typ.) 100A 50A 25A 100A 50A 25A INPUT NO LOAD DISSIPATION 6W standby saving mode OFF MODE CURRENT DRAW 1mA EFFICIENCY (Typ.) Note.1 88% 89% 90% 90% 91% 92% BATTERY TYPES Open & sealed lead acid FUSE 40A*4 40A*2 20A*2 40A*4 40A*2 20A*2 BATTERY BAT. LOW ALARM 11.3 4% 22.5 4% 45 4% 11.3 4% 22.5 4% 45 4% INPUT BAT. LOW SHUTDOWN 10.5 4% 21 4% 42 4% 10.5 4% 21 4% 42 4% PROTECTION By internal fuse open REVERSE POLARITY 90 5 70 5 OVER TEMPERATURE Protection type : Shut down o/p voltage, re-power on to recover by internal RTH3 detect on heatsink of power diode OUTPUT SHORT Protection type : Shut down o/p voltage, re-power on to recover OUTPUT PROTECTION 105 ~ 115% load for 180 sec., 115% ~ 150% load for 10 sec. OVER LOAD (Typ.) Protection type : Shut down o/p voltage, re-power on to recover GFCI PROCTECTION Optional (Only type F) None WORKING TEMP. 0 ~ +40 100% load +60 50% load WORKING HUMIDITY 20% ~ 90% RH non-condensing ENVIRONMENT o STORAGE TEMP., HUMIDITY -30 ~ +70 / -22 ~ +158 F, 10 ~ 95% RH VIBRATION 10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes None EN60950-1 SAFETY STANDARDS UL458 (only forGFC recepltacles- type F) Bat I/P - AC O/P:3.0KVAC AC O/P - FG:1.5KVAC WITHSTAND VOLTAGE SAFETY & ISOLATION RESISTANCE Bat I/P-AC O/P, Bat I/P-FG:100M Ohms/500VDC / 25 / 70% RH EMC EMI CONDUCTION&RADIATION Compliance to FCC class A Compliance to EN55022 class A, 72/ 245/ CEE, 95/ 54/ CE, E-Mark EMS IMMUNITY ----- Compliance to EN61000-4-2,3,8 ENV50204 DIMENSION 345*184*70mm (L*W*H) OTHERS 4.3Kg 2pcs/9.6Kg/1.16CUFT PACKING COOLING Loading controlled cooling fan for GFCI receptacle-type F Thermostatically controlled cooling fan for others. 1.Efficiency is tested by 750W, linear load at 13V, 26V, 52V input voltage. NOTE 2.All parameters not specified above are measured at rated load, 25 of ambient temperature. File Name:TS-1000-SPEC 2008-07-291000W True Sine Wave DC-AC Power Inverter TS-1000 s e ri e s TS 1000 112 A A :TYPE A OUTLET B :TYPE B OUTLET 12:12VDC True sine wave inverter C :TYPE C OUTLET Bat. Voltage: 24:24VDC D :TYPE D OUTLET 48:48VDC E :TYPE E OUTLET 1:110VAC F :TYPE F OUTLET Output: O/P Wattage:1000W 2:230VAC AC Output Receptacles (optional) TYPE-A TYPE-B TYPE-C TYPE-D TYPE-E TYPE-F USA EUROPE AUSTRALIA U.K JAPAN GFCI Mechanical Specification Unit:mm 50.05 Air flow direction 28.55 19.22 10 AC Output Setting ON Status OFF Battery Load Remote port Type-A AC Output Setting ON Status OFF Battery Load Remote port Type-B 171 184 File Name:TS-1000-SPEC 2008-07-29 7 48 12 200 72.5 345 27.2 10.7 70 Reverse Polarity Will Damage The Unit. WARNING: BATTERY NEG POS Inverter Inverter Inverter Inverter Cat.No.(1GG1HS-212) Wire Range(10-4 AWG Str Cu Soldered Wires) Torque (17.7-26.5 in lb) Chassis Ground