MLX90373KVS-ABA-100-RE Melexis

MLX90373 Triaxis Position Processor Datasheet Features and Benefits Description Hall Technology. The MLX90373 is a monolithic sensor sensitive to the three components of the flux density applied On-Chip Signal Processing for Robust Absolute to the IC (i.e. B , B and B ). This allows the X Y Z Position Sensing. MLX90373 with the correct magnetic circuit to ISO26262 ASIL-C Safety decode the absolute position of any magnet Element out of Context (SEooC). moving in its vicinity (e.g. rotary position from 0 Programmable Measurement Range. to 360 Degrees or linear displacement, see Figure 2). Programmable Linear Transfer Characteristic (Multi-points 4 or 8 points or Piece-Wise- The MLX90373 provides a 2-wires PSI5 (Peripheral Linear 17 or 32 points). Sensor Interface 5) output protocol over the 2-wire PSI5 protocol (v1.3 and v2.1). supply line. The protocol is compatible with v1.3 and v2.1 PSI5 specifications. 48 bit ID Number option. Dual Die (Full Redundant) - TSSOP-16 Package (RoHS). PCB-less DMP-4 Package (RoHS). Robustness against Stray-Field. TSSOP-16 DMP-4 Application Examples Absolute Rotary Position Sensor. Absolute Linear Position Sensor. Pedal Position Sensor. Throttle Position Sensor. Ride Height Position Sensor. Steering Wheel Position Sensor. Fuel Level Sensor. Non-Contacting Potentiometer.MLX90373 Triaxis Position Processor Datasheet Ordering Information Product Temp Package Option Code Packing Form Definition MLX90373 K VS ABA-100 RE/RX Angular Position Stray-Field Immune MLX90373 K VS ABA-103 RE/RX Angular Position Stray-Field Immune MLX90373 K VS ABA-108 RE/RX Angular Position Stray-Field Immune MLX90373 K VS ABA-300 RE/RX Linear / Angular Position MLX90373 K VS ABA-303 RE/RX Linear / Angular Position MLX90373 K VS ABA-308 RE/RX Linear / Angular Position MLX90373 K GO ABA-300 RE Linear / Angular Position Legend: Temperature Code: K: from -40C to 125C Package Code: GO : TSSOP-16 package (fully redundant dual die, see 18.1) VS : DMP-4 package (dual mold PCB-less, see 18.2) Option Code: ABA: die Version xxx-123: 1: Application Magnetic configuration 1: Angular Rotary Stray-Field Immune 3: Legacy / Angular Rotary / Linear position 2: SW Configuration 0 : Default Configuration 3: Trim-and-Form for DMP-4 package 0: Standard straight leads. See 18.2.1.1 3: Trim-and-Form STD2 2.54. See 18.2.1.2 8: Trim-and-Form STD4 2.54. See 18.2.1.3 Packing Form: RE : Tape & Reel RX : Tape & Reel, similar to RE with parts face-down (DMP-4 package only) Ordering Example: MLX90373KVS-ABA-100-RE For an Angular Rotary Stray-Field Immune application in DMP-4 package, delivered in Reel, face-up. Table 1: Ordering information legend Revision 1.0 May 2019 Page 2 of 55