PTC04-DB-MUPET Melexis

PTC04 Programmer for Melexis PTC Devices 1. Features 2. Application Examples Universal programming utility Experimental tool for Lab and Prototyping Fast development Production Equipment for Serial Fast plug-in for software applications Programming Atmega128 Core Programming tool for characterization Firmware updatable via RS232 and USB FPGA updatable via RS232 and USB 3 High Current Programmable Supplies 1 High Speed Fast Programmable Supply 16 bit Level Settings 16 bit differential Measurements 4 analog comparators Vector Generator I2C to Daughter Board Mountable in 19 Rack 3. Ordering information Product Code Description PTC04 Programmer Unit (Full Set: Including adapter, cables, software) st PTC04-DB-HALL01 Daughter Board 1 generation Linear Hall sensors products nd PTC04-DB-HALL03 Daughter Board 2 generation Linear Hall and current Sensors PTC04-DB-HALL04 Daughter Board PSI5 interface products PTC04-DB-HALL05 Daughter Board Current sensor products PTC04-DB-90316 Daughter Board Triaxis sensor products nd rd PTC04-DB-HALL06 Daughter Board 2 and 3 generation Triaxis and Linear sensor products PTC04-DB-PRESSURE01 Daughter Board Pressure sensors products PTC04-DB-SPI Daughter Board SPI interface products PTC04-DB-FastLoader Daughter Board LIN interface products PTC04-DB-922xx Daughter Board Latch and Switch products PTC04-DB-xxxxx Other Daughter Boards for future products PTC04-19-x (with x equal to 1 till 2) 19Rack with build in x number of PTC04 4. Accessories Product Code Description Software Environment MPT (Windows) Including Calibration Software and update tools DLL for Mini-Tester (Windows) DLLs for all supported products (Windows) User Interface for most support products (Windows) Revision 008 - 13 January 2021 Datasheet Page 1 of 21 3901290014501 Programmer for Melexis PTC Devices Original Datasheet PTC04 Programmer for Melexis PTC Devices 5. Functional Diagram Figure 5-1 PTC04 Functional Block Diagram 6. General Description The PTC-04 programmer was designed for efficient, precise calibration of the Melexis families of programmable ICs. The programmer is designed to be easily adapted to a standard PC and to an application module to allow calibration of programmable sensor ICs within the operating environment. The PTC-04 programmer contains its own programmable power supply and measurement circuitry. The programmer is similar to a standard EEPROM programmer, but adds many special features such as 16 bit voltage and current measurement capability, and configuration options that will accommodate users from the prototyping phase directly into production. An IBM compatible PC is required (not included) to load software to the programmer and control the functions of the programmer. Communication is done through a standard RS-232 null modem cable to a COM port of the PC or via USB. The PC requires no custom configuration, allowing the programmer to be used with any PC with a COM port speed of 115.2kbs or a standard USB 1.1 or USB 2.0 interface Revision 008 - 13 January 2021 Datasheet Page 2 of 21 3901290014501 Programmer for Melexis PTC Devices Original Datasheet