metrinch g p t www.serenco.nl 83 metrinch power probe yre seals bootgun ower-start rakJak oJak eagle powerhandhAnD tooLS About metrinch the Difference that counts lugs, does not transmit the extreme peaks force applied to a Metrinch tool the more A nut or a bolt has flats and corners. The found when a tool with a wedge shaped positive the grip becomes thus minimising corners are more easily damaged and do profile is used. In distributing the torque the risk of injury to an operator which may not offer the optimum grip for a tool. In load to the fastener trough the flats, the be caused through a socket or a spanner developing the Metrinch tool system Jozef Metrinch tool does not only achieve greater slipping off a fastener. Laboratory test Ruzicka had the aim to design sockets force, but also lowers the possibility of results prove that torque loadings of 1.5 and spanners, which would not only have distortion to the nut or bolt head. times greater than those possible with a longer effective life, but would also ensure conventional socket can be achieved using minimal damage to the fasteners on which Having a thin wall is an a Metrinch tool. they are used. The patented Metrinch Wall advantage in every socket. Drive profile drives only on the flats and We can afford to provide Quality Assurance and Guarantee not on the corners. such a wall, because All Metrinch tools are forged from high The dimensions of Metrinch sockets and with Metrinch spanners quality Chrome Vanadium Alloy Steel, and sockets the force is and meet with the torque and hardness absorbed where the wall has its greatest requirements necessary with the relevant strength. Metrinch sockets are capable international standards, DIN, U.S. Federal of exceeding the tightening torques Specification and British Standard. Our spanners have been precisely calculated, specified in the DIN standard by 70 to 100%, factory has an exacting quality assurance so that a single Metrinch tool will operate depending on the socket size. program, monitored by a highly trained on both metric and inch series fasteners. technical staff using For example, with a spanner 19mm it is Quality & Safety the most up to date possible not only to tighten or undo a The Metrinch Wall Drive profile is not the laboratory equipment. metric not or bolt, but also the inch bolts only feature we rely on. The steel our tools Constant inspections 3/4 AF, 3/8 BSW and 7/16 BSF. Even are made of, forms another important are made during the when such bolts have become worn, aspect. To achieve the best, it is imperative stages in the production damaged or completely rounded by to use a steel alloy this being Chrome process, and we make a 100% check of abrasion. A further major advantage in Vanadium 46CrV4, which provides a all components at the time of packing to terms of application is that the Metrinch margin of safety, particularly in conditions make sure that our high standards are Wall Drive profile can be used on open-end involving extreme stresses. We also attach maintained. Metrinch tools are used all spanners as well as on sockets and ring- great value to product finish, all our tools over the world, and carry an unconditional spanners. Metrinch open-end spanners are chrome-plated and polished. This is worldwide free replacement guarantee if always provide a 4-point grip instead not just for visual reasons, but because for any reason a tool happens to fail. of the 2-point grip characterizing the it provides the most effective protection traditional profile. against rust, even in extreme conditions. Award Winner We take the principles of on-the-job safety Discerning judges in torque Loading and accident prevention very seriously. Germany granted the The Metrinch Wall Drive Profile was The patented Metrinch Wall Drive profile Metrinch tool system designed to provide a greater area of force has been precisely calculated to ensure the coveted award for application, compared with that applied by a secure and even application of torque innovation in design at conventional tools. This profile, because to the flats of a nut or bolt and not to the Munich in 1991. of the buttress effect of its load bearing corners. In most instances the greater the SectionS Combination spanners Sockets Impact sockets & accessories Clip rail sets Combinations spanner sets Combination & impact sockets sets Tel: +31 (0) 30 241 50 11 84
