1N3525A Microchip

TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01844 1-800-446-1158 / (978) 794-1666 / Fax: (978) 689-0803 Website: http: //www.microsemi.com 400mW ZENER VOLTAGE REGULATOR DIODE DEVICES 1N3506A through 1N3534A o MAXIMUM RATING AT 25 C Junction and Storage Temperature: -65C to +175C DC Power Dissipation: 500mW T = +125C EC Forward Voltage 200mA: 1.1 volts maximum ELECTRICAL CHARACTERISTICS (TA = 25C, unless otherwise specified) Zener Type Zener Voltage Izt Zener Voltage Max Zener Impedance Power Rating Tolerance Izt Ohms Volts mA 1N3506A 3.3 20.0 5% 24.0 400mW 1N3507A 3.6 20.0 5% 22.0 400mW 1N3508A 3.9 20.0 5% 20.0 400mW 1N3509A 4.3 20.0 5% 18.0 400mW 1N3510A 4.7 20.0 5% 16.0 400mW 1N3511A 5.1 20.0 5% 14.0 400mW 1N3512A 5.6 20.0 5% 8.0 400mW 1N3513A 6.2 20.0 5% 3.0 400mW DO-35 1N3514A 6.8 20.0 5% 3.0 400mW 1N3515A 7.5 10.0 5% 4.0 400mW 1N3516A 8.2 10.0 5% 5.0 400mW 1N3517A 9.1 10.0 5% 6.0 400mW 1N3518A 1.0 10.0 5% 7.0 400mW 1N3519A 11.0 10.0 5% 8.0 400mW 1N3520A 12.0 10.0 5% 10.0 400mW 1N3521A 13.0 5.0 5% 12.0 400mW 1N3522A 15.0 5.0 5% 14.0 400mW 1N3523A 16.0 5.0 5% 16.0 400mW 1N3524A 18.0 5.0 5% 18.0 400mW 1N3525A 20.0 5.0 5% 20.0 400mW 1N3526A 22.0 5.0 5% 35.0 400mW 1N3527A 24.0 5.0 5% 38.0 400mW 1N3528A 27.0 4.0 5% 40.0 400mW 1N3529A 30.0 4.0 5% 48.0 400mW 1N3530A 33.0 3.0 5% 50.0 400mW 1N3531A 36.0 3.0 5% 75.0 400mW LDS-0063 Rev. 2 (091964) Page 1 of 2 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01844 1-800-446-1158 / (978) 794-1666 / Fax: (978) 689-0803 Website: http: //www.microsemi.com 400mW ZENER VOLTAGE REGULATOR DIODE ELECTRICAL CHARACTERISTICS (CONT.) (TA = 25C, unless otherwise specified) Zener Voltage Izt Zener Voltage Max Zener Impedance Izt Power Rating Zener Type Tolerance Ohms Volts mA 1N3532A 39.0 3.0 5% 100.0 400mW 1N3533A 43.0 2.0 5% 130.0 400mW 1N3534A 47.0 2.0 5% 150.0 400mW o o NOTE 1 : Zener Voltage is measured with the device junction in thermal equilibrium at an ambient temperature of 25 C + 3 C. NOTE 2 : Zener impedance is derived by superimposing on I A 60Hz rms a.c. current equal to 10% of I . ZT ZT NOTE 3 : VZ is the maximum difference between VZ at I and VZ at I measured with the device junction in thermal ZT ZT equilibrium. DESIGN DATA CASE: DO-35 Hermetically sealed glass case. LEAD FINISH : Tin/ Lead Cathode band denotes polarity LDS-0063 Rev. 2 (091964) Page 2 of 2