1N6036(A) thru 1N6072(A)
Qualified Levels:
1500 WATT BIDIRECTIONAL
JAN, JANTX, and
Available on
TRANSIENT VOLTAGE SUPPESSOR JANTXV
commercial
versions
Qualified per MIL-PRF-19500/507
DESCRIPTION
This popular Transient Voltage Suppressor (TVS) series for 1N6036 thru 1N6072A are JEDEC
registered selections for bidirectional devices. All have the same high Peak Pulse Power
rating of 1500 W with extremely fast response times. They are also available in military
qualified selections as described in the Features section herein. They are most often used
for protecting against transients from inductive switching environments, induced RF effects, or
induced secondary lightning effects as found in lower surge levels of IEC61000-4-5. They are
also very successful in protecting airborne avionics and electrical systems. Since their
response time is virtually instantaneous, they can also protect from ESD and EFT per
IEC61000-4-2 and IEC61000-4-4.
Important: For the latest information, visit our website 1N6036(A) thru 1N6072(A)
MAXIMUM RATINGS
Parameters/Test Conditions Symbol Value Unit
Junction and Storage Temperature T and T -55 to +175 C
J STG
(1)
Peak Pulse Power @ T = +25 C P 1500 W
L PP
(2)
Rated Average Power Dissipation @ T +125 C P 1 W
L M(AV)
o
Solder Temperature @ 10 s T 260 C
SP
Notes: 1. At 10/1000 us with repetition rate of 0.01% or less (see Figures 1, 2, & 4).
2. At 10 mm from body (see derating in Figure 3 and note below).
MECHANICAL and PACKAGING
CASE: DO-13 (DO-202AA), welded, hermetically sealed metal and glass.
TERMINALS: All external metal surfaces are tin-lead plated and solderable per MIL-STD-750 method 2026.
MARKING: Part number.
POLARITY: Not applicable for bidirectional TVS.
TAPE & REEL option: Standard per EIA-296 (add TR suffix to part number). Consult factory for quantities.
WEIGHT: Approx 1.4 grams.
See Package Dimensions on last page.
PART NOMENCLATURE
JAN 1N6036 A (e3)
Reliability Level RoHS Compliance
JAN = JAN level e3 = RoHS compliant (available
JANTX = JANTX level on commercial grade only)
JANTXV = JANTXV level Blank = non-RoHS compliant
(All of the above require A suffix)
Blank = Commercial
Voltage Tolerance
A = 5%
JEDEC type number
Blank = 10%
(See Electrical Characteristics
table)
SYMBOLS & DEFINITIONS
Symbol Definition
V Standoff Voltage: Applied Reverse Voltage to assure a nonconductive condition.
WM
o
V Breakdown Voltage: This is the Breakdown Voltage the device will exhibit at 25 C.
(BR)
Maximum Clamping Voltage: The maximum peak voltage appearing across the TVS when subjected to the peak pulse
current in a one millisecond time interval. The peak pulse voltage is the combination of voltage rise due to both the
V
C
series resistance and thermal rise and positive temperature coefficient ( ).
V(BR)
I Peak Pulse Current: The peak current during the impulse. (See Figure 2)
PP
P Peak Pulse Power: The pulse power as determined by the product of V and I .
PP C PP
I Standby Current: The current at the standoff voltage (V ).
D WM
I Breakdown Current: The current used for measuring Breakdown Voltage (V ).
(BR) (BR)
T4-LDS-0097, Rev. 3 (120714) 2012 Microsemi Corporation Page 2 of 7