24AA16/24LC16B 2 16K I C Serial EEPROM Device Selection Table Description: Part VCC Max. Clock Temp. The Microchip Technology Inc. 24AA16/24LC16B Number Range Frequency Ranges (24XX16*) is a 16 Kbit Electrically Erasable PROM. The device is organized as eight blocks of 256 x 8-bit (1) 24AA16 1.7-5.5 400 kHz I memory with a 2-wire serial interface. Low-voltage 24LC16B 2.5-5.5 400 kHz I, E design permits operation down to 1.7V with standby Note 1: 100 kHz for VCC <2.5V. and active currents of only 1 A and 1 mA, respectively. The 24XX16 also has a page write capability for up to 16 bytes of data. The 24XX16 is Features: available in the standard 8-pin PDIP, surface mount Single Supply with Operation down to 1.7V SOIC, TSSOP, 2x3 DFN, 2x3 TDFN and MSOP pack- for 24AA16 Devices, 2.5V for 24LC16B Devices ages, and is also available in the 5-lead SOT-23, and Chip Scale packages. Low-Power CMOS Technology: - Active current 1 mA, typical Block Diagram - Standby current, 1 A, typical HV 2 2-Wire Serial Interface, I C Compatible WP Generator Schmitt Trigger inputs for Noise Suppression Output Slope Control to eliminate Ground Bounce 100 kHz and 400 kHz Clock Compatibility I/O Memory EEPROM Control Control XDEC Array Page Write Time 5 ms Max. Logic Logic Self-Timed Erase/Write Cycle Page Latches 16-Byte Page Write Buffer Hardware Write-Protect I/O SCL YDEC ESD Protection > 4,000V More than 1 Million Erase/Write Cycles SDA Data Retention > 200 Years VCC Factory Programming Available Sense Amp. VSS Packages include 8-lead PDIP, SOIC, TSSOP, R/W Control MSOP, DFN, TDFN, 5-lead SOT-23 and Chip Scale Pb-Free and RoHS Compliant Temperature Ranges: - Industrial (I): -40C to +85C - Automotive (E): -40C to +125C (2) PDIP/MSOP/SOIC/TSSOP CS (Chip Scale) SOT-23 DFN/TDFN A0 1 8 VCC SCL 5 WP 1 VCC A0 1 8 VCC 1 2 VSS WP 3 2 7 WP A1 A1 2 7 WP VSS 2 45 SCL SDA 6 SCL A2 3 A2 3 6 SCL VSS 4 5 SDA 34 VCC (Top Down View, SDA Balls Not Visible) VSS 4 5 SDA Note 1: Pins A0, A1 and A2 are not used by the 24XX16 (no internal connections). 2: Available in I-temp, AA only. *24XX16 is used in this document as a generic part number for the 24AA16/24LC16B devices. 2009 Microchip Technology Inc. DS21703J-page 124AA16/24LC16B 1.0 ELECTRICAL CHARACTERISTICS () Absolute Maximum Ratings VCC.............................................................................................................................................................................6.5V All inputs and outputs w.r.t. VSS ......................................................................................................... -0.3V to VCC +1.0V Storage temperature ...............................................................................................................................-65C to +150C Ambient temperature with power applied................................................................................................-40C to +125C ESD protection on all pins ...................................................................................................................................................... 4 kV NOTICE: Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only and functional operation of the device at those or any other conditions above those indicated in the operational listings of this specification is not implied. Exposure to maximum rating conditions for extended periods may affect device reliability. TABLE 1-1: DC CHARACTERISTICS Industrial (I): TA = -40C to +85C, VCC = +1.7V to +5.5V DC CHARACTERISTICS Automotive (E): TA = -40C to +125C, VCC = +2.5V to +5.5V Param. Symbol Characteristic Min. Typ. Max. Units Conditions No. D1 VIH WP, SCL and SDA pins D2 High-level input voltage 0.7 VCC V D3 VIL Low-level input voltage 0.3 VCC V D4 VHYS Hysteresis of Schmitt .05 VCC V (Note 1) Trigger inputs D5 VOL Low-level output voltage 0.40 V IOL = 3.0 mA, VCC = 2.5V D6 ILI Input leakage current 1 AVIN = VSS or VCC D7 ILO Output leakage current 1 AVOUT = VSS or VCC D8 CIN, Pin capacitance 10 pFVCC = 5.0V (Note 1) COUT (all inputs/outputs) TA = 25C, FCLK = 1 MHz D9 ICC write Operating current 3 mAVCC = 5.5V, SCL = 400 kHz D10 ICC read 0.01 1 mA D11 ICCS Standby current 0.3 1 A Industrial .01 5 A Automotive SDA = SCL = VCC WP = VSS Note 1: This parameter is periodically sampled and not 100% tested. 2: Typical measurements taken at room temperature. DS21703J-page 2 2009 Microchip Technology Inc.