Atmel AT86RF215 Device Family Sub-1GHz/2.4GHz Transceiver and I/Q Radio for TM IEEE Std 802.15.4 -2015 TM IEEE Std 802.15.4g -2012 ETSI TS 102 887-1 AT86RF215 / AT86RF215IQ / AT86RF215M DATASHEET Features AT86RF215 Fully integrated radio transceiver covering 389.5-510MHz / 779-1020MHz / 2400- 2483.5MHz including: European band: 863-870MHz / 870-876MHz / 915-921MHz Chinese band: 470-510MHz / 779-787MHz North American band: 902-928MHz Korean band: 917-923.5MHz Japanese band: 920-928MHz World-wide ISM band: 2400-2483.5MHz I/Q data interface: One TX and two RX serial low voltage differential signal (LVDS) interfaces 13-bit I/Q data interface with a sampling frequency of up to 4MHz Transceiver Control interface: SPI (serial peripheral interface) Supported PHYs (*proprietary) MR-FSK Symbol rates: 50, 100, 150, 200, 300*, 400ksymbol/s Rate 1/2-FEC: RSC and NRNSC, with and without interleaving Order: 2-level, 4-level MR-OFDM Option 1: 100, 200, 400, 800, 1200*, 1600*, 2400*kb/s Option 2: 50, 100, 200, 400, 600, 800, 1200*kb/s Option 3: 50, 100, 200, 300, 400, 600kb/s Option 4: 50, 100, 150, 200, 300kb/s MR-O-QPSK 100kchip/s with 6.25, 12.5, 25, 50kb/s data rate 200kchip/s with 12.5, 25*, 50*, 100*kb/s data rate 1000kchip/s with 31.25, 125, 250, 500kb/s data rate 2000kchip/s with 31.25, 125, 250, 500, 1000*kb/s data rate O-QPSK 1000kchip/s with 250kb/s and 500*kb/s data rate 2000kchip/s with 250kb/s and 1000*kb/s data rate Bi-directional differential RF signal ports for: Band I: 433/470/780/863/868/915/917/920MHz Band II: 2450MHz Atmel-42415E-WIRELESS-RF215 Datasheet 052016 Simultaneous operation of sub-1GHz and 2.4GHz transceiver Separate 2kbytes RX and TX frame buffer IEEE MAC support Frame filter (IEEE Std 802.15.4-2006) FCS handling Automatic acknowledgement (IEEE Std 802.15.4-2006) CCA with automatic transmit Industry leading link budget Programmable TX output power up to +14.5dBm 900MHz band Noise figure below 5dB for sub-1GHz and 2.4GHz transceiver Receiver sensitivity down to -123dBm at 6.25kb/s MR-O-QPSK Radio transceiver features Integrated TX/RX switch, LNA, PLL loop filter and RF frontend control Fast settling PLL supporting frequency hopping Automatic filter calibration Received signal strength indicator / energy detection True random number generator Optimized for low BOM cost and ease of production Low power supply voltage from 1.8V to 3.6V Internal voltage regulators and battery monitor Reduced power consumption (RPC) modes for MR-FSK and MR-OQPSK Low current consumption (incl. baseband processing / without I/Q interface) Deep sleep 30nA RX listen 6..28mA (RPC mode dependent) RX active 28mA TX 62mA 14dBm output power Industrial temperature range from 40C to +85C 48-pin low-profile lead-free plastic QFN package 2 Atmel AT86RF215 - DATASHEET Atmel-42415E-WIRELESS-RF215 Datasheet 052016