AT97SC3205T-SDK2 Microchip

AT97SC3205T-SDK2 AT97SC3205P-SDK2 2 Atmel TPM I C/SPI Development Kit USER GUIDE 2 Atmel I C/SPI Demonstration Kit Introduction The Atmel TPM Development Kit includes examples of how to use the Trusted Platform Module (TPM) in an embedded and PC application. Source code is provided to enable an embedded designer to make quick progress in understanding and utilizing the TPM. 2 The TPM Development Kits are based on the Atmel SAM4S ARM with an added I C or SPI TPM device. The TPM demonstration code and evaluation software are included on a USB flash drive which 2 comes with the kits. The board includes a SPI or I C TPM, a SAMS4 processor, a board reset button, a JTAG connector, and detachable segments to allow for engineering system integration as shown in Figure 1. Complete SAM4S ARM documentation can be found on the Atmel web site at the following link: Features 2 The TPM kit is a custom board containing an I C TPM or SPI TPM and related circuitry connected to the SAM4S ARM board. Interface signals on the board are: Power SCL Ground SCLK PIRQ MOSI Chip Select (CS) RST MISO GND SDA V CC The following functional sections are provided on the Embedded TPM kit: 2 AT97SC3205 I C or SPI Atmel TPM TPM Reset Switch RC Reset Delay Decoupling Capacitors Pull-Up and Pull-Down Resistors Test Points USB Drive The included USB drive includes the following: User Guide Source Code of the Demo Hex Images for Reloading the Demo (If Necessary) Kit Schematics 2 Figure 1. Atmel I C/SPI Demonstration Kit Mini JTAG Connector SAMS4 ARM Reset Button TPM JTAG Connector Detachable Segments 2 AT97SC3205T/3205P-SDK2 TPM I C/SPI Development Kiti USER GUIDE 2 Atmel-8528D-TPM-I2C-SPI-Development-Kit-UserGuide 052014