ATA6561-GBQW-N Microchip

ATA6560/1 High-Speed CAN Transceiver with Standby Mode CAN FD Ready Features General Description Fully ISO 11898-2, ISO 11898-5, and SAE J2284 The ATA6560/1 is a high-speed CAN transceiver that Compliant provides an interface between a Controller Area Net- work (CAN) protocol controller and the physical CAN FD Ready two-wire CAN bus. The transceiver is designed for Communication Speed up to 5 Mbps high-speed (up to 5 Mbps) CAN applications in the Low Electromagnetic Emission (EME) and High automotive industry, providing differential transmit and Electromagnetic Immunity (EMI) receive capability to (a microcontroller with) a CAN Differential Receiver with Wide Common-Mode protocol controller. Range It offers improved Electromagnetic Compatibility (EMC) ATA6560: Silent Mode (Receive Only) and ESD performance, as well as features such as: Remote Wake-Up Capability via CAN Bus Ideal passive behavior to the CAN bus when the Functional Behavior Predictable under All Supply supply voltage is off Conditions Direct interfacing to microcontrollers with supply Transceiver Disengages from the Bus when Not voltages from 3V to 5V (ATA6561) Powered Up Three operating modes, together with the dedicated RXD Recessive Clamping Detection fail-safe features, make the ATA6560/1 an excellent High Electrostatic Discharge (ESD) Handling choice for all types of high-speed CAN networks, Capability on the Bus Pins especially in nodes requiring a Low-Power mode with Bus Pins Protected Against Transients in wake-up capability via the CAN bus. Automotive Environments Transmit Data (TXD) Dominant Time-Out Package Types Function ATA6560 ATA6561 Undervoltage Detection on VCC and VIO Pins SOIC SOIC CANH/CANL Short-Circuit and Overtemperature TXD STBY TXD STBY 1 8 1 8 Protected GND CANH 2 7 GND 2 7 CANH Qualified According to AEC-Q100: Only VCC 3 6 CANL ATA6560-GAQW, ATA6560-GBQW, VCC 3 6 CANL 4 5 RXD NSIL RXD 4 5 VIO ATA6561-GAQW, and ATA6561-GBQW Packages: SOIC8, VDFN8 with Wettable Flanks (Moisture Sensitivity Level 1) ATA6561 ATA6560 Applications 3 x 3 VDFN* with 3 x 3 VDFN* with wettable flanks Classical CAN and CAN FD networks in the following wettable flanks applications: TXD STBY TXD STBY 1 8 1 8 Automotive GND GND CANH CANH 2 7 Industrial 2 7 Aerospace VCC CANL VCC CANL 3 6 3 6 Medical RXD RXD NSIL 4 5 VIO 4 5 Consumer *Includes Exposed Thermal Pad (EP) see Table 1-2. 2018 Microchip Technology Inc. DS20005991A-page 1ATA6560/1 ATA6560/1 FAMILY MEMBERS AEC-Q100 Device VIO Pin NSIL Pin VDFN8 SOIC8 Description Qualified ATA6560-GAQW X X X Standby mode and Silent mode ATA6560-GBQW X X X Standby mode and Silent mode ATA6561-GAQW X X X Standby mode, VIO - pin for compatibility with 3.3V and 5V microcontroller ATA6561-GBQW X X X Standby mode, VIO - pin for compatibility with 3.3V and 5V microcontroller ATA6560-GAQW-N X X Standby mode and Silent mode ATA6560-GBQW-N X X Standby mode and Silent mode ATA6561-GAQW-N X X Standby mode, VIO - pin for compatibility with 3.3V and 5V microcontroller ATA6561-GBQW-N X X Standby mode, VIO - pin for compatibility with 3.3V and 5V microcontroller Note: For ordering information, see the Product Identification System section. DS20005991A-page 2 2018 Microchip Technology Inc.