PROGRAMMABLE LOGIC PRODUCTS ATF15XX-DK3 CPLD DEVELOPMENT KIT LOGIC DOUBLING The ATF15xx-DK3 is a third-generation low-cost development/programmer kit for the designer who wishes to begin working with Atmel s ATF15xx family of industry-standard pin-compatible Complex Programmable Logic Devices (CPLDs) with Logic Doubling. Like the ATF15xx-DK2, the ATF15xx-DK3 allows designers to design, synthesize, simulate, program and evaluate their designs using either the free Atmel WinCUPL software or an evaluation version of Atmel s ProChip Designer as well as the included 44-lead TQFP package adapter. The leading-edge synthesis and simulation software from Mentor Graphics and Altium are included in the ProChip Designer tool. The kit can be extended to be used to program all the different packages of the ATF15xx family by simply adding the package adapter options. Once the design is completed, the designer can install a sample ATF15xx family device in the provided PCB and program it using the built-in In-System Programmable (ISP) industry-standard 4-pin JTAG interface, the ATMISP software, and the provided PC parallel port cable. The included tutorial takes the designer through the complete CPLD development process. All the software runs on Windows platforms. LEDs, switches, and expansion headers for all pins are provided to allow comprehensive prototyping and evaluation. The ATF15xx-DK3, includes everything a designer needs to get started with the Atmel Logic Doubling CPLDs. CPLD Demo/Programmer Board CPLD Programming Cable 44-lead TQFP Adapter 5V, 3.3V and 1.8V ISP Cable for PC Parallel Port ISP (JTAG) Port Expansion Headers 2 MHz Crystal Oscillator Logic Doubling CPLDs Four 7-segment LED Displays ATF1502BE-7AU44, 1.8V, Eight Individual LEDs 32 Macrocell CPLD with ISP V Operation: 1.8V, 3.3V and 5.0V CC ATF1504ASV-15AU44, 3.3V, Easy Access to CPLD I/O Pins 64 Macrocell CPLD with ISP Global Clear, Output Enable, I/O and Power SwitchesATMEL ATF15XX-DK3 EPLD SOFTWARE MATRIX ProChip Designer Evaluation Atmel WinCupl Atmel Corporation 2325 Orchard Parkway VHDL San Jose, CA 95131, USA Tel: 1(408) 441-0311 Verilog Fax: 1(408) 487-2600 CUPL Regional Headquarters Schematic Europe Atmel Sarl Route des Arsenaux 41 (1) Mentor Graphics Precision Synthesis Case Postale 80 CH-1705 Fribourg, Switzerland VHDL Synthesis Tel: (41) 26-426-5555 Fax: (41) 26-426-5500 Verilog Synthesis Asia (2) Altium PeakFPGA Room 1219 Chinachem Golden Plaza VHDL Synthesis 77 Mody Road Tsimshatsui (2) East Kowloon, Hong Kong Altium Design Explorer 99SE Tel: (852) 2721-9778 Fax: (852) 2722-1369 Schematic Japan CUPL 9F, Tonetsu Shinkawa Bldg. 1-24-8 Shinkawa (1) ModelSIM Chuo-ku, Tokyo 104-0033, Japan Tel: (81) 3-3523-3551 VHDL Simulation Fax: (81) 3-3523-7581 Verilog Simulation Product Contact (2) Programmable Logic Products Altium PeakSIM 2325 Orchard Parkway San Jose, CA 95131, USA VHDL Simulation Tel: 1(408) 441-0311 Fax: 1(408) 487-2600 Atmel s Fitters with Logic Doubling www.atmel.com/products/PLD CPLD Devices Literature Requests www.atmel.com/literature ATF15xxAS/ASL ATF15xxASV/ASVL ATF15xxBE ATF1500A/AL Disclaimer: The information in this document is ATF2500C provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or SPLD Devices in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN ATMELS TERMS AND CONDI- Notes: 1. The evaluation period for Mentor Graphics Precision Synthesis and ModelSIM is six months. TIONS OF SALE LOCATED ON ATMELS WEB SITE, 2. The evaluation period for Altium tools is 30 days. ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATU- TORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, Ordering Information SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR IN- Ordering Code Description Price (USD) ABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no representations or warran- ATF15xx-DK3 Development/Programming Kit 99 ties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to speci cations and product descriptions at any ATF15xx-DK3-SAA44 44-lead TQFP Package Adapter Included in DK3 Kit time without notice. Atmel does not make any commit- ment to update the information contained herein. Unless speci cally provided otherwise, Atmel products are not suitable for, and shall not be used in, automotive applica- ATF15xx-DK3-SAJ44 44-lead PLCC Package Adapter 35 tions. Atmels products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life. ATF15xx-DK3-SAJ84 84-lead PLCC Package Adapter 35 Atmel Corporation 2006. All rights reserved. Atmel , logo and combinations thereof, Everywhere You Are , ProChip Designer , Logic Doubling and others, are ATF15xx-DK3-SAA100 100-lead TQFP Package Adapter 135 registered trademarks or trademarks of Atmel Corporation or its subsidiaries. Windows and others are registered trademarks or trademarks of Microsoft Corporation. ATF15xx-DK3-SAA144 144-lead TQFP Package Adapter 149 Mentor Graphics , ModelSIM and others are registered trademarks or trademarks of Mentor Graphics Corporation or its subsidiaries in US and/or other countries. Other terms and product names may be trademarks of others. 3611APLD01/06 Fitters & Devices Simulation Synthesis Design Entry