SAMA5D2 Series Ultra-Low-Power Arm Cortex -A5 Core-Based MPU, 500 MHz, Graphics Interface, Ethernet 10/100, CAN, USB, PCI 5.0 Pre-Certified Introduction The SAMA5D2 series is a high-performance, ultra-low-power Arm Cortex-A5 CPU-based embedded microprocessor (MPU) running up to 500 MHz, with support for multiple memories such as DDR2, DDR3L, LPDDR2, LPDDR3, and QSPI and e.MMC Flash. The devices integrate powerful peripherals for connectivity and user interface applications, and offer advanced security functions (Arm TrustZone , tamper detection, secure data storage, etc.), as well as high- performance crypto accelerators AES, SHA and TRNG. Selected members of the SAMA5D2 series are qualified for extended industrial temperature range operation (-40C to 105C external temperature). The SAMA5D2 series is delivered with a free Linux distribution and bare metal C examples. Features Arm Cortex-A5 Core Armv7-A architecture Arm TrustZone NEON Media Processing Engine Up to 500 MHz ETM/ETB 8 Kbytes Memory Architecture Memory Management Unit (MMU) 32-Kbyte L1 data cache, 32-Kbyte L1 instruction cache 128-Kbyte L2 cache configurable to be used as an internal SRAM One 128-Kbyte scrambled internal SRAM One 160-Kbyte internal ROM 64-Kbyte scrambled and maskable ROM embedding bootloader/Secure bootloader 96-Kbyte unscrambled, unmaskable ROM for NAND Flash BCH ECC table High-bandwidth scramblable 16-bit or 32-bit Double Data Rate (DDR) multiport dynamic RAM controller supporting up to 512 Mbytes 8-bank DDR2/DDR3 (DLL off only) / DDR3L (DLL off only) / LPDDR1/ LPDDR2/LPDDR3, including on-the-fly encryption/decryption path 8-bit SLC/MLC NAND controller, with up to 32-bit Error Correcting Code (PMECC) System Running up to 166 MHz in Typical Conditions Reset Controller (RSTC), Shutdown Controller (SHDWC), Periodic Interval Timer (PIT), independent Watchdog Timer (WDT) and secure Real-Time Clock (RTC) with clock calibration One 600 to 1200 MHz PLL for the system and one 480 MHz PLL optimized for high-speed USB Digital fractional PLL for audio (11.2896 MHz and 12.288 MHz) Internal low-power 12 MHz RC and 32 kHz typical RC Selectable 32.768 Hz low-power oscillator and 8 to 24 MHz oscillator 51 DMA channels including two 16-channel 64-bit Central DMA Controllers Complete Datasheet DS60001476D-page 1 2020 Microchip Technology Inc. SAMA5D2 Series 64-bit Advanced Interrupt Controller (AIC) 64-bit Secure Advanced Interrupt Controller (SAIC) Three programmable external clock signals Low-Power Modes Ultra-low-power mode with fast wake-up capability Low-power Backup mode with 5-Kbyte SRAM and SleepWalking features Wake up from up to nine wake-up pins, UART reception, analog comparison Fast wake-up capability Extended Backup mode with DDR in Self-Refresh mode Peripherals LCD TFT controller (LCDC) up to 1024x768 or 1280x768 (still image). Four overlays, rotation, post- processing and alpha blending, 24-bit parallel RGB interface ITU-R BT. 601/656/1120 Image Sensor Controller (ISC) supporting up to 5 Mpixel sensors with a parallel 12-bit interface for Raw Bayer, YCbCr, Monochrome and JPEG-compressed sensor interface Two Synchronous Serial Controllers (SSC), two Inter-IC Sound Controllers (I2SC), and one Stereo Class D amplifier (CLASSD) One Peripheral Touch Controller (PTC) with up to 8 X-lines and 8 Y-lines (64-channel capacitive touch) One Pulse Density Modulation Interface Controller (PDMIC) One USB device high-speed port (UDPHS) and one USB host high-speed port or two USB host high-speed ports (UHPHS) One USB host high-speed port with a High-Speed Inter-Chip (HSIC) interface One 10/100 Ethernet MAC (GMAC) Energy efficiency support (IEEE 802.3az standard) Ethernet AVB support with IEEE802.1AS timestamping IEEE802.1Qav credit-based traffic-shaping hardware support IEEE1588 Precision Time Protocol (PTP) Two high-speed memory card hosts: SDMMC0: SD 3.0, eMMC 4.51, 8 bits SDMMC1: SD 2.0, eMMC 4.41, 4 bits only Two master/slave Serial Peripheral Interfaces (SPI) Two Quad Serial Peripheral Interfaces (QSPI) Five FLEXCOMs (USART, SPI and TWI) Five UARTs Two master CAN-FD (MCAN) controllers with SRAM-based mailboxes, and time- and event-triggered transmission MCAN implements the non-ISO CAN FD frame format and therefore does not pass the CAN FD WARNING Conformance Test according to ISO 16845-1:2016. One Rx only UART in backup area (RXLP) One Analog Comparator Controller (ACC) in backup area 2 Two 2-wire interfaces (TWIHS) up to 400 Kbits/s supporting the I C protocol and SMBUS One full-featured 4-channel 16-bit Pulse Width Modulation (PWM) controller Two 3-channel 32-bit Timer/Counters (TC), supporting basic PWM modes One 12-channel, 12-bit, Analog-to-Digital Converter (ADC) with resistive touchscreen capability Safety Zero-power Power-on Reset (POR) cells Main crystal clock failure detector Write-protected registers Integrity Check Monitor (ICM) based on SHA256 DS60001476D-page 2 Complete Datasheet 2020 Microchip Technology Inc.