ATSAMB11-MR210CA/MR510CA Ultra Low Power BLE 4.1 Module DATASHEET Description The Atmel ATSAMB11-MR210CA is an ultra-low power Bluetooth SMART (BLE 4.1) module with Integrated MCU, Transceiver, Modem, MAC, PA, TR Switch, and Power Management Unit (PMU). It is a standalone Cortex -M0 applications processor with embedded Flash memory and BLE connectivity. The qualified Bluetooth Smart protocol stack is stored in dedicated ROM, the firmware includes L2CAP service layer protocols, Security Manager, Attribute protocol (ATT), Generic Attribute Profile (GATT), and the Generic Access Profile (GAP). Additionally, application profiles such as Proximity, Thermometer, Heart Rate, Blood Pressure, and many others are supported and included in the protocol stack. The module contains all circuitry required including a ceramic high gain antenna, 26MHz crystal, and PMU circuitry. The customer simply needs to place the module on the customer PCB design, provide power and a 32kHz Real Time Clock or crystal. All References to ATSAMB11-MR210CA, refer to the ATSAMB11-MR510CA as well. Features Complies with Bluetooth V4.1, ETSI EN 300 328 and EN 300 440 Class 2, FCC CFR47 Part 15, and ARIB STD-T66 Bluetooth Certification QD ID Controller (see declaration D028678) QD ID Host (see declaration D028679) 2.4GHz transceiver and Modem -95dBm/-93dBm programmable receiver sensitivity -20 to +3.5dBm programmable TX output power Integrated T/R switch Incorporated antenna ARM Cortex -M0 32-bit processor Single wire Debug (SWD) interface Four-channel DMA controller Brown-out detector and Power On Reset Watch Dog Timer Memory 128KB embedded RAM (96KB available for application) 128KB embedded ROM 256KB stacked Flash memory Hardware Security Accelerators AES-128 Atmel-42498D-SAMB11-MR210CA-MR510CA Datasheet 09/2016 SHA-256 Peripherals 23 digital and three wakeup GPIO with 96k Internal Pullup resistors, four Mixed Signal GPIO 2x SPI (Master/Slave) 2 2x I C (Master/Slave) 2x UART 1x SPI Flash 3-axis quadrature decoder 4x Pulse Width Modulation (PWM), three General Purpose Timers, and one Wake up Timer Four channel 11-bit ADC Clock Integrated 26MHz oscillator 26MHz crystal oscillator Fully integrated sleep oscillator Ultra-low power Less than 1.1A sleep current (8K RAM retention and RTC running) 3.2mA peak TX current (0dBm, 3.6V) 5.0mA peak RX current (3.6V, -95dBm sensitivity) Integrated Power management 2.3 - 4.2V input range for PMU 2.3 - 3.6V input range for I/O (limited by Flash memory) Fully integrated Buck DC-DC converter 2 ATSAMB11-MR210CA/MR510CA DATASHEET 2 Atmel-42498D-SAMB11-MR210CA-MR510CA Datasheet 09/2016