ATSAMB11XR/ZR Ultra-Low Power Bluetooth Low Energy SiP/Module Introduction The ATSAMB11-XR2100A is an ultra-low power Bluetooth Low Energy (BLE) 5.0 System in a Package (SiP) with Integrated MCU, transceiver, modem, MAC, PA, Transmit/Receive (T/R) switch, and Power Management Unit (PMU). It is a standalone Cortex -M0 applications processor with embedded Flash memory and BLE connectivity. The Bluetooth SIG-qualified Bluetooth Low Energy protocol stack is stored in a dedicated ROM. The firmware includes L2CAP service layer protocols, Security Manager, Attribute protocol (ATT), Generic Attribute Profile (GATT), and the Generic Access Profile (GAP). Additionally, example applications are available for application profiles such as proximity, thermometer, heart rate and blood pressure, and many others. The ATSAMB11-XR2100A provides a compact footprint and various embedded features, such as a 26 MHz crystal oscillator. The ATSAMB11-ZR210CA is a fully certified module that contains the ATSAMB11-XR2100A and all external RF circuitry required, including a ceramic high-gain antenna. The user simply places the module into their PCB and provides power with a 32.768 kHz Real-Time Clock (RTC) or crystal, and an I/O path. Microchip BluSDK Smart offers a comprehensive set of tools and reference applications for several Bluetooth SIG defined profiles and a custom profile. The BluSDK Smart will help the user quickly evaluate, design and develop BLE products with the ATSAMB11-XR2100A and ATSAMB11-ZR210CA. The ATSAMB11-XR2100A and associated ATSAMB11-ZR210CA module have passed the Bluetooth SIG certification for interoperability with the Bluetooth Low Energy 5.0 specification QDID: 117593. Features 2.4 GHz Transceiver and Modem: -92.5 dBm receiver sensitivity -55 dBm to +3.5 dBm programmable TX output power Integrated T/R switch Single wire antenna connection (ATSAMB11-XR2100A) Incorporated chip antenna (ATSAMB11-ZR210CA) Processor Features: ARM Cortex -M0 32-bit processor Serial Wire Debug (SWD) interface Four-channel Direct Memory Access (DMA) controller Watchdog Timer Memory: Datasheet DS70005342D-page 1 2019 Microchip Technology Inc. ATSAMB11XR/ZR 128 KB embedded Random Access Memory (RAM) 128 KB embedded ROM 256 KB stacked Flash memory Hardware Security Accelerators: Advanced Encryption Standard (AES)-128 Secure Hash Algorithm (SHA)-256 Peripherals: 23 digital and 4 mixed-signal General Purpose Input Outputs (GPIOs) with 96 kOhm internal programmable pull-up or down resistors and retention capability, and one wake-up GPIO with 96 kOhm internal pull-up resistor Two Serial Peripheral Interface (SPI) Master/Slave 2 Two Inter-Integrated Circuit (I C) Master/Slave Two UART One SPI Flash interface (used for accessing the internal stacked Flash) Three-axis quadrature decoder Four Pulse Width Modulation (PWM) channels Three General Purpose Timers and one Always-On (AON) sleep Timer 4-channel, 11-bit Analog-to-Digital Converter (ADC) Clock: Integrated 26 MHz RC oscillator Integrated 2 MHz RC oscillator 26 MHz crystal oscillator (XO) 32.768 kHz Real Time Clock crystal oscillator (RTC XO) Ultra-Low Power: 2.03 A sleep current (1) 4.18 mA peak TX current 5.26 mA peak RX current (2) 16.4 A average advertisement current (three channels, 1s interval) Integrated Power Management: 2.3V to 4.3V battery voltage range 2.3V to 3.6V input range for I/O (limited by Flash memory) Fully integrated Buck DC/DC converter Temperature Range: -40C to 85C Package: 49-pin FLGA SiP package 5.50 mm x 4.50 mm 35-pin module package 10.541 mm x 7.503 mm BT SIG QDID: 117593 Note: 1. TX output power - 0 dBm. 2. Advertisement channels - 3 Advertising interval - 1 second Advertising event type - Connectable undirected Advertisement data payload size - 31 octets. DS70005342D-page 2 Datasheet 2019 Microchip Technology Inc.