JANTXV1N6471 Microchip

1N6469US 1N6476US WWW.Microsemi .COM 1N6469US thru 1N6476US Voidless-Hermetically-Sealed Surface Mount Unidirectional Transient SCOTTSDALE DIVISION Suppressors DESCRIPTION APPEARANCE This surface mount series of industry recognized voidless-hermetically-sealed Unidirectional Transient Voltage Suppressor (TVS) designs is military qualified to MIL- PRF-19500/552 and are ideal for high-reliability applications where a failure cannot be tolerated. They provide a Working Peak Standoff Voltage selection from 5.0 to 51.6 Volts with 1500 W ratings. They are very robust in hard-glass construction and also use an internal metallurgical bond identified as Category I for high reliability applications. The 1500 W series is military qualified to MIL-PRF-19500/552. These devices are also available in axial-leaded packages for thru-hole mounting by deleting the US suffix (see separate data sheet for 1N6469 thru 1N6476A). Microsemi also offers numerous other TVS products to meet higher and lower peak pulse power and Package G voltage ratings in both through-hole and surface-mount packages. (or D-5C) IMPORTANT: For the most current data, consult MICROSEMIs website: 1N6469US 1N6476US WWW.Microsemi .COM 1N6469US thru 1N6476US Voidless-Hermetically-Sealed Surface Mount Unidirectional Transient SCOTTSDALE DIVISION Suppressors ELECTRICAL CHARACTERISTICS MAXIMUM MAXIMUM BREAKDOWN CLAMPING PEAK PULSE MAXIMUM BREAK WORKING MAX CURRENT VOLTAGE CURRENT TEMP. DOWN PEAK LEAKAGE TYPE I V COEF. OF VOLTAGE (BR) VOLTAGE CURRENT C I PP V(BR) V I 10/1000 s V (BR) WM D MIN. 8/20 s 10/1000 s o Volts mAdc Vdc V(pk) A(pk) A(pk) %/ C Adc 1N6469US 5.6 50 5 1500 9.0 945 167 -.03, +0.04 1N6470US 6.5 50 6 1000 11.0 775 137 0.06 1N6471US 13.6 10 12 20 22.6 374 66 0.085 1N6472US 16.4 10 15 10 26.5 322 57 0.085 1N6473US 27.0 5 24 5 41.4 207 36.5 .096 1N6474US 33.0 1 30.5 5 47.5 181 32 .098 1N6475US 43.7 1 40.3 5 63.5 135 24 .101 1N6476US 54.0 1 51.6 5 78.5 107 19 .103 SYMBOLS & DEFINITIONS Symbol Definition V Minimum Breakdown Voltage: The minimum voltage the device will exhibit at a specified current. BR Working Peak Voltage: The maximum peak voltage that can be applied over the operating temperature range. V WM This is also referred to as Standoff Voltage. I Maximum Standoff Current: The maximum current that will flow at the specified voltage and temperature. D V Maximum clamping voltage at specified I (Peak Pulse Current) at the specified pulse conditions. C PP Peak Pulse Power: The peak power dissipation resulting from the peak impulse current I . P PP PP GRAPHS Peak Value I PP Pulse time duration (tp) is defined as that point where I decays to 50% of peak P value (I ). PP time (t) in milliseconds FIG. 1 Non-repetive peak pulse power rating curve FIG. 2 Pulse wave form for exponential surge NOTE: Peak power defined as peak voltage times peak current for 10/1000 s Copyright 2007 Microsemi Page 2 10-03-2007 REV D Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Pulse current (I ) in percent of I P PP