KSZ8061MNX/KSZ8061MNG 10Base-T/100Base-TX Physical Layer Transceiver Revision 1.0 General Description The KSZ8061MN is a single-chip 10Base-T/100Base-TX Ethernet physical layer transceiver for transmission and reception of data over unshielded twisted pair (UTP) cable. Quiet-WIRE The KSZ8061MN features Quiet-WIRE internal filtering to Features reduce line emissions. It is ideal for applications, such as Quiet-WIRE programmable EMI filter automotive or industrial networks, where stringent radiated MII interface with MDC/MDIO management interface for emission limits need to be met. Quiet-WIRE can use low- register configuration cost unshielded cable, where previously only shielded cable solutions were possible. The KSZ8061MN also On-chip termination resistors for the differential pairs features enhanced immunity to environmental EM noise. LinkMD + receive signal quality indicator The KSZ8061MN offers the Media Independent Interface Fast start-up and link (MII) for direct connection with MII-compliant Ethernet Low-power design with IEEE 802.3az Energy Efficient MAC processors and switches. Ethernet support It is designed to exceed Automotive AEC-Q100 and EMC Ultra-Deep Sleep standby mode: CPU or signal detect requirements, and features an extended temperature activated. range of 40C to +105C. Loopback modes for diagnostics Programmable interrupt output The KSZ8061MNX is supplied in a 32-lead, 5mm 5mm QFN or WQFN package, while the KSZ8061MNG is in a Applications 48-lead, 7mm 7mm QFN package. Industrial control The KSZ8061RNB and KSZ8061RND devices have an Vehicle on-board diagnostics (OBD) RMII interface and are described in a separate datasheet. Automotive gateways Datasheets and support documentation are available on Camera and sensor networking Micrels website at: www.micrel.com. Infotainment Functional Diagram Quiet-WIRE and LinkMD are registered trademarks of Micrel, Inc. Micrel Inc. 2180 Fortune Drive San Jose, CA 95131 USA tel +1 (408) 944-0800 fax + 1 (408) 474-1000 Micrel, Inc. KSZ8061MNX/KSZ8061MNG Ordering Information Temperature Lead Part Number Package Description Range Finish KSZ8061MNXI 40C to 85C QFN-32LD Pb-Free Industrial Temperature AEC-Q100 Automotive Qualified (Extended (1) KSZ8061MNXV WQFN-32LD Pb-Free 40C to 105C Temperature) KSZ8061MNGW 40C to 105C QFN-48LD Pb-Free Industrial Extended Temperature KSZ8061MNX Evaluation Board (1) KSZ8061MNX-EVAL 0C to 70C (with KSZ8061MNX device installed) Note: 1. Contact factory for availability. August 27, 2015 Revision 1.0 2