dsPIC33FJ16MC102 and PIC24FJ16MC102 dsPIC33FJ16MC102 and PIC24FJ16MC102 PIM Information Sheet The dsPIC33FJ16MC102 and PIC24FJ16MC102 test points associated with each I/O pin (i.e., RP0, RP1, plug-in modules (PIMs) (Part No. MA330026 and etc.), allows the designer to reroute the pin to any of the MA240026) are designed to demonstrate the capabil- available pins on the Development Board. This capabil- ities of the dsPIC33FJ16MC102 and ity enables easier and faster design times. PIC24FJ16MC102 motor control devices using the Table 1 shows the mapping between the Development dsPICDEM MCLV Development Board (DM330021) Board functions and the device pins. or dsPICDEM MCHV Development Board (DM330023). Note: Use of this PIM with the MCHV The dsPIC33FJ16MC102 device is an ultra low cost high-performance 16-bit digital signal controller within development board (DM330023). a small 28-pin 6x6mm QFN package. The The MCHV Development Board, PIC24FJ16MC102 device offers the same functional- 10-00871 Revision 4 or earlier (see ity as the dsPIC33FJ16MC102, with the exception of product label), must be upgraded to DSP capabilities. support this PIM. Please contact the Both devices are equipped with Peripheral Pin Select local Microchip sales office to obtain (PPS), which allows many of the digital peripherals to this free upgrade. be remapped to use any number of pins on the device. The PIMs take advantage of PPS by using zero ohm resistors to connect the I/O to the Development Board. Simply removing the zero ohm resistors and using the TABLE 1: 28-PIN TO 100-PIN PINOUT Device PIM Pin dsPIC33FJ16MC102 and PIC24FJ16MC102 Functional Description Pin Number 1 PGED1/AN2/C2INA/C1INC/CTMUC/RP0/CN4/RB0 35, 28 DC Bus/POT 2 PGEC1/AN3/CVREFIN/CVREFOUT/C2INB/C1IND/RP1/CN5/RB1 20, 41 POT/Phase 1 Voltage Feedback 3 AN4/C3INC/C2INC/RP2/CN6/RB2 83, 42 Switch 1/Phase 2 Voltage Feedback 4 AN5/C3IND/C2IND/RP3/CN7/RB3 84, 43 Switch 2/Phase 3 Voltage Feedback 5 Vss 15 Ground reference for logic and I/O pins 6 OSCI/CLKI/CN30/RA2 63 OSCI 7 OSCO/CLKO/CN29/RA3 64 OSCO 8 PGED3/SOSCI/RP4/CN1/RB4 27 Debug 9 PGEC3/SOSCO/T1CK/CN0/RA4 26 Debug 10 VDD 16 Positive supply for peripheral logic and I/O pins 11 FLTB1/ASDA1/RP5/CN27/RB5 20, 68, 83 QEB/Hall Sensor A/Switch 1 12 FLTA1/ASCL1/RP6/CN24/RB6 18 Fault 1A 13 SCK1/INT0/RP7/CN23/RB7 22, 70 Index/Hall Sensor C 14 SCL1/SDO1/RP8/CN22/RB8 21, 69, 84 QEA/Hall Sensor B/Switch 2 15 SDA1/SDI1/RP9/CN21/RB9 19, 71 Fault Reset/PWM Enable 16 VSS 36 Ground reference for logic and I/O pins 17 VCAP CPU logic filter capacitor connection 18 PWM1H3/RP10/CN16/RB10 3 PWM1H3 19 PWM1L3/RP11/CN15/RB11 100 PWM1L3 20 PWM1H2/RP12/CN14/RB12 99 PWM1H2 21 PWM1L2/RP13/CN13/RB13 98 PWM1L2 2011 Microchip Technology Inc. DS51989A-page 1dsPIC33FJ16MC102 and PIC24FJ16MC102 Device PIM Pin dsPIC33FJ16MC102 and PIC24FJ16MC102 Functional Description Pin Number 22 PWM1H1/RTCC/RP14/CN12/RB14 94 PWM1H1 23 PWM1L1/RP15/CN11/RB15 93 PWM1L1 24 AVSS 31 Ground reference for analog modules 25 AVDD 30 Positive supply for analog modules 26 MCLR 13 Master Clear (Reset) input 27 PGED2/AN0/C3INB/C1INA/CTED1/CN2/RA0 20, 25 POT/Phase 1 Current Feedback 28 PGEC2/AN1/C3INA/C1INB/CTED2/CN3/RA1 32, 24 BUS Shunt/Phase 2 Current Feedback DS51989A-page 2 2011 Microchip Technology Inc.