MCP1407-E/AT Microchip

MCP1406/07 6A High-Speed Power MOSFET Drivers Features General Description High Peak Output Current: 6.0A (typical) The MCP1406/07 devices are a family of buffers/MOSFET drivers that feature a single-output Low Shoot-Through/Cross-Conduction Current in with 6A peak drive current capability, low shoot-through Output Stage current, matched rise/fall times and propagation delay Wide Input Supply Voltage Operating Range: times. These devices are pin-compatible and are -4.5Vto18V improved versions of the TC4420/TC4429 MOSFET High Capacitive Load Drive Capability: drivers. - 2500 pF in 20 ns The MCP1406/07 MOSFET drivers can easily charge - 6800 pF in 40 ns and discharge 2500pF gate capacitance in under Short Delay Times: 40 ns (typical) 20 ns, provide low enough impedances (in both the ON Matched Rise/Fall Times and OFF states) to ensure that intended state of the MOSFETs will not be affected, even by large transients. Low Supply Current: The input to the MCP1406/07 may be driven directly - With Logic 1 Input 130 A (typical) from either TTL or CMOS (3V to 18V). - With Logic 0 Input 35 A (typical) These devices are highly latch-up resistant under any Latch-Up Protected: Will Withstand 1.5A Reverse conditions that fall within their power and voltage Current ratings. They are not subject to damage when up to 5V Logic Input Will Withstand Negative Swing up to 5V of noise spiking (of either polarity) occurs on the ground Pin compatible with the TC4420/TC4429 devices pin. All terminals are fully protected against Space-saving 8-Pin SOIC, PDIP and electrostatic discharge (ESD), up to 2.0 kV (HBM) and 8-Pin 6 x 5 mm DFN Packages 400V (MM). The MCP1406/07 single-output 6A MOSFET driver Applications family is offered in both surface-mount and pin-through-hole packages with a -40Cto+125C Switch Mode Power Supplies temperature rating, making it useful in any wide Pulse Transformer Drive temperature range application. Line Drivers Motor and Solenoid Drive 2006-2016 Microchip Technology Inc. DS20002019C-page 1MCP1406/07 Package Types 8-Pin PDIP/SOIC MCP1406 MCP1407 V V V 1 8 V 1 DD DD DD 8 DD 7 OUT INPUT 2 7 INPUT 2 OUT 3 6 3 6 OUT NC NC OUT GND GND45 GND GND45 (2) 8-Pin 6x5 DFN-S MCP1407 MCP1406 V 1 8 V V 1 8 V DD DD DD DD INPUT 2 7 OUT EP INPUT 2 7 OUT EP 9 9 NC 3 6 OUT NC 3 6 OUT GND 4 5 GND GND 4 5 GND 5-Pin TO-220 MCP1406 MCP1407 Tab is common to V DD 1234 5 12345 Note 1: Duplicate pins must both be connected for proper operation. 2: Exposed pad of the DFN package is electrically isolated see Table 3-1. DS20002019C-page 2 2006-2016 Microchip Technology Inc. INPUT GND V DD GND OUT INPUT GND V DD GND OUT