MIC94092YC6 TR Microchip

MIC94090/1/2/3/4/5 High Side Load Switches for Consumer Applications General Description Features The MIC94090/1/2/3/4/5 is a family of high-side load switches 1.7V to 5.5V input voltage range designed for operation from 1.7V to 5.5V input voltage. The 1.2A continuous operating current load switch pass element is an internal 130m R P- DS(ON) 130m R DS(ON) channel MOSFET which enables the device to support up to Internal level shift for CMOS/TTL control logic 1.2A continuous current. Additionally, the load switch Ultra low quiescent current supports 1.5V logic level control and shutdown features. The MIC94090 and MIC94091 feature rapid turn on. The Micro-power shutdown current MIC94092 and MIC94093 provide a slew rate controlled soft- Rapid turn-on: MIC94090/1 start turn-on of 790s, while the MIC94094 and MIC94095 Soft-Start: MIC94092/3 (790s), MIC94094/5 (120s) provide a slew rate controlled soft-start turn-on of 120s. The Load discharge circuit: MIC94091/3/5 soft-start feature option prevents an in-rush current event Space saving and thermally capable 1.2mm x 1.2mm from pulling down the input supply voltage. Thin MLF package The MIC94091, MIC94093, and MIC94095 include a 250 Industry standard SC-70-6 package auto discharge load circuit that is switched on when the load switch is disabled. Applications An active pull-down on the enable input keeps the MIC94090/1/2/3/4/5 in a default OFF state until the enable pin Cellular phones is pulled above 1.25V. Internal level shift circuitry allows low Portable Navigation Devices (PND) voltage logic signals to switch higher supply voltages. The GPS modules enable voltage can be as high as 5.5V and is not limited by Personal Media Players (PMP) the input voltage. Ultra Mobile PCs The MIC94090/1/2/3/4/5 operating voltage range makes them ideal for Lithium ion and NiMH/NiCad/Alkaline battery Other Portable applications powered systems, as well as non-battery powered PDAs applications. The devices provide low quiescent current and Portable instrumentation low shutdown current to maximize battery life. Industrial and DataComm equipment Datasheets and support documentation can be found on Micrels web site at: www.micrel.com. Typical Application MIC94090 (ultra fast turn on) MIC94091 (ultra fast turn on with auto-discharge) MIC94092 (790s soft-start) MIC94093 (790s soft-start with auto-discharge) MIC94094 (120s soft-start) MIC94095 (120s soft-start with auto-discharge) MLF and MicroLeadFrame are registered trademarks of Amkor Technology, Inc. Micrel Inc. 2180 Fortune Drive San Jose, CA 95131 USA tel +1 (408) 944-0800 fax + 1 (408) 474-1000 Micrel, Inc. MIC94090/1/2/3/4/5 Ordering Information Part Number Part Marking Fast Soft- Load (2) (3) Package (1) Pb-Free Pb-Free Turn On Start Discharge MIC94090YMT D1 4-Pin 1.2mm x 1.2mm Thin MLF MIC94091YMT D2 4-Pin 1.2mm x 1.2mm Thin MLF MIC94092YMT D5 790s 4-Pin 1.2mm x 1.2mm Thin MLF MIC94093YMT D7 790s 4-Pin 1.2mm x 1.2mm Thin MLF MIC94094YMT 0D 120s 4-Pin 1.2mm x 1.2mm Thin MLF MIC94095YMT 1D 120s 4-Pin 1.2mm x 1.2mm Thin MLF MIC94090YC6 D1D SC-70-6 MIC94091YC6 D2D SC-70-6 MIC94092YC6 D5D 790s SC-70-6 MIC94093YC6 D7D 790s SC-70-6 MIC94094YC6 0DD 120s SC-70-6 MIC94095YC6 1DD 120s SC-70-6 Notes: 1. Under bar symbol ( ) may not be to scale. 2. Thin MLF = Pin 1 identifier. 3. Thin MLF is a GREEN RoHS-compliant package. Lead finish is NiPdAu. Mold compound is Halogen Free. Pin Configuration PIN 1 TRIANGLE BY MARKING VOUT 1 GND 4 EN23 VIN 4-Pin (1.2mm x 1.2mm) Thin MLF (MT) 6-Pin SC-70-6 (C6) Top View Top View Pin Description Pin Number Pin Name Pin Function TMLF-4 SC-70-6 1 1 V Drain of P-Channel MOSFET. OUT 4 2, 5 GND Ground: Connect to electrical ground. 3 4 V Source of P-Channel MOSFET. IN Enable (Input): Active-high CMOS-compatible control input for switch. Internal 2M 2 6 EN pull down resistor to GND, output will be off if this pin is left floating. No Internal Connection. A signal or voltage applied to this pin will have no effect on -- 3 NC device operation. March 2009 2 M9999-033109-A