MIC94164YCS TR Microchip

MIC94161/2/3/4/5 3A High-Side Load Switch with Reverse Blocking General Description Features The MIC94161/2/3/4/5 is a family of high-side load 1.5mm 1mm 6-ball WLCSP package switches designed to operate from 1.7V to 5.5V input 14.5m R DSON voltage. The load switch pass element is an internal 1.7V to 5.5V input voltage range 14.5m R N-Channel MOSFET which enables the DSON 3A continuous operating current device to support up to 3A of continuous current. Additionally, the load switch supports 1.5V logic level Reverse current flow blocking (no body diode) control and shutdown features in a tiny 1.5mm 1mm Internal level shift for CMOS/TTL control logic 6-ball WLCSP package. Ultra-low quiescent current The MIC9416x provides reverse current protection when Micropower shutdown current the device is disabled. The device will not allow the flow of Soft-start: MIC94161/4/5 (2.7ms) current from the output to the input when the device is Load discharge circuit: MIC94162/4 turned OFF. Additionally, the MIC94161 features Ultra-fast turn-off time overvoltage protection to protect the load when the input voltage is above 4.55V, as well as a precise enable Junction operating temperature from 40C to +125C threshold which keeps the MIC94161 in the default OFF Applications state until the EN pin rises above 1.15V. Solid state drives (SSD) The MIC94161/2/3/4/5 operating voltage range makes them ideal for Lithium-ion and NiMH/NiCad/Alkaline Smart phones and tablets battery-powered systems, as well as non-battery-powered Personal media players (PMP) applications. The devices provide low quiescent current Ultra mobile PCs and low shutdown current to maximize battery life. Portable instrumentation Datasheets and support documentation are available on GPS modules Micrels web site at: www.micrel.com. Datacom equipment Typical Application MIC94161 (2.7ms Soft Start with OVP) MIC94162 (Ultra-Fast Turn On with Auto Discharge) MIC94163 (Ultra-Fast Turn On) MIC94164 (2.7ms Soft Start with Auto Discharge) MIC94165 (2.7ms Soft Start) Micrel Inc. 2180 Fortune Drive San Jose, CA 95131 USA tel +1 (408) 944-0800 fax + 1 (408) 474-1000 Micrel, Inc. MIC94161/2/3/4/5 Ordering Information Part Number Marking OVP Turn-On Time Active Discharge Package MIC94161YCS 1Q Yes 2.7ms No 1.5mm 1mm 6-Ball WLCSP MIC94162YCS 2Q No 60s Yes 1.5mm 1mm 6-Ball WLCSP MIC94163YCS 3Q No 60s No 1.5mm 1mm 6-Ball WLCSP MIC94164YCS 4Q No 2.7ms Yes 1.5mm 1mm 6-Ball WLCSP MIC94165YCS ZQ No 2.7ms No 1.5mm 1mm 6-Ball WLCSP Pin Configuration 6-Ball 1.5mm 1mm WLCSP (CS) (Top View) Pin Description Pin Number Pin Name Pin Function A1, B1 VOUT Source of N-channel MOSFET. C1 GND Ground. A2, B2 VIN Input Supply: Drain of N-channel MOSFET. Enable (Input): Active-high control input for switch. Internal 2M pull-down resistor. Output will be C2 EN off if this pin is left floating. Revision 1.1 March 14, 2014 2