MPLAD6.5KP48AE3 Microchip

MPLAD6.5KP10A(e3) MPLAD6.5KP48CA(e3) High-Reliability 6.5 kW, Unidirectional and Bidirectional screening available Available in reference to TVS Protection Device MIL-PRF-19500 DESCRIPTION These 6.5 kW rated transient voltage suppressors (TVS) in a surface mount PLAD package are provided Tested in with design features to minimize thermal resistance and cumulative heating. These devices have the accordance with the ability to clamp dangerous high voltage, short term transients such as those produced by directed or requirements of radiated electrostatic discharge phenomena before entering sensitive component regions of a circuit design. Typical applications include lighting and automotive load dump protection. They are particularly AEC-Q101 effective at meeting the multi-stroke lightning standard RTCA DO-160, section 22 for aircraft design. This efficient low profile package design is offered in standoff voltage selections (V ) of 10 volt to 48 WM volts in either unidirectional or bidirectional construction. This product addition expands High reliable PLAD product portfolio. For more information on PLAD products, broad range of TVS devices please visit our website. Important: For the latest information, visit our website MPLAD6.5KP10A(e3) MPLAD6.5KP48CA(e3) o MAXIMUM RATINGS 25 C unless otherwise specified Parameters/Test Conditions Symbol Value Unit Junction and Storage Temperature T and T -55 to +150 C/W J STG (1) Thermal Resistance Junction-to-Ambient R 50 C/W JA Thermal Resistance Junction-to-Case R 1.5 C/W JC (2) P 6,500 W Peak Pulse Power 10/1000 s PP Unidirectional <100 ps t (0 volts to V min) clamping ( BR) Bidirectional <5 ns (3) Forward Clamping Voltage 300 Amps V 2.5 V FS (3) Forward Surge Current I 400 A FSM Solder Temperature 10 s T 260 C SP (5) (1) Rated Average Power dissipation T = 25 C P 2.5 W A M(AV) (4) T = 100 C 33.3 W C Notes: 1. When mounted on FR4 PC board with recommended mounting pad (see pad layout). 2. Also see figures 1 and 2. With impulse repetition rate (duty factor) of 0.05% or less. 3. At 8.3 ms half-sine wave (unidirectional devices only). 4. Case temperature controlled on heat sink as specified. 5. See MicroNote 134 for derating P when also applying steady-state power. PP MECHANICAL and PACKAGING CASE: Epoxy, meets UL94V-0. TERMINALS: Tin/lead or matte-tin (fully RoHS compliant) plating. MARKING: Part number. DELIVERY option: Tape and reel (13 inch). See Package Dimensions on last page. PART NOMENCLATURE M PLAD 6.5K P 7.0 CA (e3) Reliability Level* RoHS Compliance M e3 = RoHS compliant MA Blank = non-RoHS compliant MX MXL Polarity *(see Hi-Rel Non-Hermetic A = Unidirectional Product Portfolio) CA = Bidirectional Package Designation Reverse Standoff Voltage P Rating (W) Plastic PP RF01083, Rev B (24/6/15) 2015 Microsemi Corporation Page 2 of 6