MPP4201 - MPP4205 CONTROL DEVICES - MMSM PIN AND LIMITER DIODES RoHS Compliant GENERAL DESCRIPTION KEY FEATURES This series of surface mount PIN and Limiter diodes Up to 10W incident RF power utilize new and unique monolithic MMSM technology. The handling technology is a package/device integration accomplished Low parasitics at the wafer fabrication level. Since the cathode and LP = 0.02nH Typical anode interconnections utilize precision photolithographic CP = 0.04pF Typical techniques rather than wire bonds, parasitic package Broadband Performance through X- inductance is tightly controlled. The package parasitics Band provide smooth non-resonant functionality through X Available on Tape & Reel or on Film Band. This series of devices meets RoHS requirements Frame for pick & place per EU Directive 2002/95/EC. Small, SOD 323 Footprint 1 RoHS Compliant 1- These devices are supplied with gold terminations. APPLICATIONS The MPP4200 series of PIN diodes can be used in RF circuits as an on/off element, as a switch, or as a current controlled resistor in attenuators extending over the frequency range from UHF through X band. Switch APPLICATION/BENEFITS applications include high speed switches (ECM systems), TR switches channel or antenna selection Receiver protection circuits switches (Telcom and WLAN applications), duplexers (radar) and digital phase shifters (phased arrays). These Broadband Switching diodes are also used as passive and active limiters for low to moderate RF power levels. Attenuator type Economy Switching applications include amplitude modulators, AGC attenuators and power levelers. RF Attenuators MRI ABSOLUTE MAXIMUM RATINGS 25 C Rating Symbol Value Unit Maximum Leakage Current IR 0.5 uA 80% of minimum Rated V B Operating Temperature T -55 to +150 C OP Storage Temperature T -65 to +150 C STG For the most current data, consult MICROSEMIs website: www.MICROSEMI.com Specifications are subject to change, consult the RFIS factory at (978) 442-5600 for the latest information. MPP4201 - MPP4205 CONTROL DEVICES - MMSM PIN AND LIMITER DIODES RoHS Compliant DEVICE ELECTRICAL PARAMETERS AT 25C 1 2 2 2 2 V (V) C (pF) R ( ) R ( ) R ( ) R ( ) B T S S S S I =10A -10V 0.01mA 1mA 10mA 20mA R Model Package Number Style (Min) (Max) (Typ) ( M ax ) (Max) MPP4201 206 70 0.20 2.5 MPP4202 206 50 0.15 2.8 MPP4203 206 50 0.10 3.0 MPP4204 206 25 0.15 2.0 MPP4205 206 70 0.15 250 7-16 5.0 TL Model Package (Typ) Number Style Application MPP4201 206 150 Switching / Attenuation MPP4202 206 50 Switching MPP4203 206 50 Economy Switching MPP4204 206 20 Switching MPP4205 206 150 Attenuation Notes: 1- Capacitance is measured at f = 1 MHz. 2- Series Resistance (R ) is measured at f = 100 MHz. Devices are mounted in a package suitable for testing. S a. R is measured at 1 GHz for the MPL series devices. S b. Not measured in anti-parallel configuration. c. Vr = 0V. This value is the sum of two junctions. For the most current data, consult MICROSEMIs website: www.MICROSEMI.com Specifications are subject to change, consult the RFIS factory at (978) 442-5600 for the latest information.