PowerDsine HiPoE QUICK REFERENCE How to power Cisco 802.11n Aironet 1250 PowerDsine 951 Splitter using PowerDsine HiPoE solutions Enables powering 12V and 24V terminals via 4-pairs PowerDsine PoE PoE 951 Splitter Specifications PD-951 Splitter Connectors 2 x RJ-45, shielded, EIA 568A and 568B DC Jacks Power & Data On unit: O.D x I.D = 2.5 x 6.4 mm Ext. Cable 1: O.D x I.D = 5.5 x 2.5 mm Power PowerDsine Ext. Cable 2: O.D x I.D = 3.4 x 1.4 mm Midspan Data Data Rate 10/100/1000 Electrical Pin Assignment & Polarity: 3/6 (+),1/2 (-) or 4/5 (+),7/8 (-) Data Input voltage: 44 - 57 Vdc Input power: 70W max Output power: 54W max Output Current: 5A 12V 2.5A 24V Ethernet Switch Network Dimensions & Weight 38 mm (H) x 130 mm (W) x 73 mm (D) Camera (2.2 in x 3.2 in x 1 in) 285 gram (0.63 lbs) Indicators Output Power Indicators: Overview Green LED (4-pairs), Yellow LED (2-pairs) Product Information Environmental Operating Temp: 0 to 40C (32 to 104F) PowerDsines PD-AS-951 High-Power active splitters enable data Storage Temp: -20 to 70C (-4 to 158F) PowerDsine 7000G Family terminals that were not originally designed to accept power from the IEEE 802.3at pre-standard High power Midspan series, Operating Humidity: 10% to 90%, Ethernet, to be powered by Power over Ethernet midspans. The PD- non-condensing delivers 32W per port, Gigabit support, available in Storage Humidity: 5% to 95%, AS-951 High Power splitter (user selectable 12V or 24V) can power 1-, 6-, 12-, 24-port models with remote management (Optional) non-condensing devices such as WiMAX CPEs, small WiMAX base-stations, 802.11n Thermal Rating: 38 BTU/Hr Access-Points, Thin- Clients, PTZ (Pan/Tilt/Zoom) IP Cameras, Video- Reliability MTBF: 100,000 hours 25C Phones and more. PD-PS-401G HiPoE Adapter Electromagnetic Emissions FCC Part 15 Class A Allows Cisco 802.11n access points to be fully powered by the & Immunity EN55022 (CISPR 22), Class A 7000G Midspans and supports operation at Gigabit data rates. High Power Splitter Solution EN55024 (CISPR 24) When using the PD-PS-401G in the system, both radios in the Regulatory Compliance CE Many contemporary terminals arWLAN access point operate, providing full coverage.e designed and deployed without Warranty 1-year the ability to accept power via their LAN input. Such devices can only accept power through their DC jack while their RJ45 input accepts Ordering Information only data. Moreover, such devices might only accept voltage levels Part Number Name Description lower than the PoE standard minimum voltage (44v in IEEE802.3af PD-7006G/AC/M PowerDsine 7006 Managed 6-port, HiPoE Managed Midspan PD-7012G/AC/M / 50v in 802.3at). Using the PD-AS-951 high power splitterPowerDsine 7012 Managed , these 12-port, HiPoE Managed Midspan PD-7024G/AC/M PowerDsine 7024 Managed 24-port, HiPoE Managed Midspan terminals immediately become PoE-ready without any modification required on their side. PD-7001G/AC PowerDsine 7001 1-port HiPoE Midspan PD-PS-401G PowerDsine PD-PS-401G Adapter HiPoE Adapter The splitter is identified as a powered device (PD) in front of the PD HiPoE/Cisco Ver 1.0 4/08 powering Midspan and after being detected and powered, it physically splits the data and power streams, arriving over a single cable, into International North America Europe two separate cords (LAN & DC) which go directly to the data terminal. Tel: +972-9-7755100 Tel: +1-631-756-4680 Tel: +44 (0) 208-622-3107 Fax: +972-9-7755111 Fax: +1-631-756-4691 Fax: +44 (0) 208-622-3200 Voltage regulation is also performed to the level required by the PowerDsine Microsemi.com PowerDsineUSA Microsemi.com UK AMSG Microsemi.com terminal (12V or 24V). India Corporate Headquarters Tel: +91-22-65529031 Tel: +1-949-221-7100 India AMSG Microsemi.com Fax: +1-949-756-0308 PowerDsine 951 Splitter Ordering Information Part Number Name PD-AS-951/12 - 24 12V - 24V 60W High Power Splitter with DC connector PD-AS-951/12 - 24/C 12V - 24V 60W High Power Splitter with DC cable For More Information North America EMEA LATAM APAC (Europe, Middle East, Africa) (Latin America) (Asia Pacific) PowerDsineUSA microsemi.com PowerDsine microsemi.com PowerDsineLATAM microsemi.com PowerDsineAPAC microsemi.com Microsemi Corporation (NASDAQ:MSCC) offers the industrys most comprehensive portfolio of semiconductor and networking technology. PowerDsine PoE Systems, a Microsemi brand, is the thought leader in energy efficient, high power PoE technology. Learn more at microsemi.com/powerdsine 2011 Microsemi Corporation. All rights reserved. Microsemi and the Microsemi logo are trademarks of Microsemi Corporation. All other trademarks and service marks are the property of their respective owners. Power Matters. MSC-PD-DS-951Splitter-8.2011