PL130-09
PL130-09
High Speed Translator Buffer to LVDS
FEATURES PIN CONFIGURATION
(TOP VIEW)
Differential LVDS output
Single AC coupled input (min. 100mV swing).
Input range from 0 to 1.0GHz.
2.5V to 3.3V operation.
GND 1 8 VDD
Available in 8-Pin SOP or 3x3mm QFN
GREEN/RoHS compliant packaging.
REF_IN 2 7 GND
GND 3 6 LVDS_BAR
DESCRIPTION
LVDS 4 5 VDD
The PL130-09 is a low cost, high performance,
high speed, buffer that reproduces any input fre-
quency from 0 to 1.0GHz. It provides a pair of
differential LVDS output. Any input signal with at
least 100mV swing can be used as reference
12 11 10 9
signal. This chip is ideal for conversion from sine
13
GND 8 LVDS_BAR
wave, TTL, CMOS, or PECL to LVDS.
14 7
GND VDD
PL130-09
15
GND 6 LVDS
16 5
GND
OE^
1 2 3 4
Note: ^ denotes internal pull up
BLOCK DIAGRAM
LVDS_BAR
REF_IN Input
LVDS
Micrel Inc. 2180 Fortune Drive San Jose, CA 95131 USA tel +1(408) 944 -0800 fax +1(408) 474-1000 www.micrel.com Rev 1/5/12 Page 1
VDD
GND
GND VDD
REF_IN
VDD
GND GND PL130-09
High Speed Translator Buffer to LVDS
PIN DESCRIPTIONS
Pin Number
Name Type Description
SOP-8L QFN-16L
1,2,4,5,
GND 1,3,7 P Ground.
9,13,14,15
VDD 5,8 7,10,11,12 P Power supply.
Reference input signal. The frequency of this signal will be re-
REF_IN 2 3 I
produced at the output (after translation to LVDS level).
LVDS 4 6 O LVDS True output.
LVDS_BAR 6 8 O LVDS Complementary output.
OE N/A 16 I Output enable (1 for enable). Internal pull-up (default is 1).
ELECTRICAL SPECIFICATIONS
1. Absolute Maximum Ratings
PARAMETERS SYMBOL MIN. MAX. UNITS
Supply Voltage V 4.6 V
DD
Input Voltage, dc V -0.5 V +0.5 V
I DD
Output Voltage, dc V -0.5 V +0.5 V
O DD
Storage Temperature T -65 150 C
S
Ambient Operating Temperature* T -40 85 C
A
Junction Temperature T 125 C
J
Lead Temperature (soldering, 10s) 260
C
ESD Protection, Human Body Model 2 kV
Exposure of the device under conditions beyond the limits specified by Maximum Ratings for extended periods may cause permane nt damage to the
device and affect product reliability. These conditions represent a stress rating only, and functional operations of the dev ice at these or any other con-
ditions above the operational limits noted in this specification is not implied. *Operating temperature is guaranteed by design. Parts are tested
to commercial grade only.
2. General Electrical Specifications
PARAMETERS SYMBOL CONDITIONS MIN. TYP. MAX. UNITS
Supply Current, No Load I Fout = 200MHz, LVDS 25 30 mA
DD
Operating Voltage V 2.25 3.63 V
DD
Output Clock Duty Cycle @ 1.25V (LVDS) 5% of input %
Short Circuit Current 50 mA
Micrel Inc. 2180 Fortune Drive San Jose, CA 95131 USA tel +1(408) 944 -0800 fax +1(408) 474-1000 www.micrel.com Rev 1/5/12 Page 2