PL130-09 PL130-09 High Speed Translator Buffer to LVDS FEATURES PIN CONFIGURATION (TOP VIEW) Differential LVDS output Single AC coupled input (min. 100mV swing). Input range from 0 to 1.0GHz. 2.5V to 3.3V operation. GND 1 8 VDD Available in 8-Pin SOP or 3x3mm QFN GREEN/RoHS compliant packaging. REF IN 2 7 GND GND 3 6 LVDS BAR DESCRIPTION LVDS 4 5 VDD The PL130-09 is a low cost, high performance, high speed, buffer that reproduces any input fre- quency from 0 to 1.0GHz. It provides a pair of differential LVDS output. Any input signal with at least 100mV swing can be used as reference 12 11 10 9 signal. This chip is ideal for conversion from sine 13 GND 8 LVDS BAR wave, TTL, CMOS, or PECL to LVDS. 14 7 GND VDD PL130-09 15 GND 6 LVDS 16 5 GND OE 1 2 3 4 Note: denotes internal pull up BLOCK DIAGRAM LVDS BAR REF IN Input LVDS Micrel Inc. 2180 Fortune Drive San Jose, CA 95131 USA tel +1(408) 944 -0800 fax +1(408) 474-1000 www.micrel.com Rev 1/5/12 Page 1 VDD GND GND VDD REF IN VDD GND GND PL130-09 High Speed Translator Buffer to LVDS PIN DESCRIPTIONS Pin Number Name Type Description SOP-8L QFN-16L 1,2,4,5, GND 1,3,7 P Ground. 9,13,14,15 VDD 5,8 7,10,11,12 P Power supply. Reference input signal. The frequency of this signal will be re- REF IN 2 3 I produced at the output (after translation to LVDS level). LVDS 4 6 O LVDS True output. LVDS BAR 6 8 O LVDS Complementary output. OE N/A 16 I Output enable (1 for enable). Internal pull-up (default is 1). ELECTRICAL SPECIFICATIONS 1. Absolute Maximum Ratings PARAMETERS SYMBOL MIN. MAX. UNITS Supply Voltage V 4.6 V DD Input Voltage, dc V -0.5 V +0.5 V I DD Output Voltage, dc V -0.5 V +0.5 V O DD Storage Temperature T -65 150 C S Ambient Operating Temperature* T -40 85 C A Junction Temperature T 125 C J Lead Temperature (soldering, 10s) 260 C ESD Protection, Human Body Model 2 kV Exposure of the device under conditions beyond the limits specified by Maximum Ratings for extended periods may cause permane nt damage to the device and affect product reliability. These conditions represent a stress rating only, and functional operations of the dev ice at these or any other con- ditions above the operational limits noted in this specification is not implied. *Operating temperature is guaranteed by design. Parts are tested to commercial grade only. 2. General Electrical Specifications PARAMETERS SYMBOL CONDITIONS MIN. TYP. MAX. UNITS Supply Current, No Load I Fout = 200MHz, LVDS 25 30 mA DD Operating Voltage V 2.25 3.63 V DD Output Clock Duty Cycle 1.25V (LVDS) 5% of input % Short Circuit Current 50 mA Micrel Inc. 2180 Fortune Drive San Jose, CA 95131 USA tel +1(408) 944 -0800 fax +1(408) 474-1000 www.micrel.com Rev 1/5/12 Page 2