RN-800S-CB Applications Remote Temperature Sensor Wireless Motor Control Remote Motion Sensors Wireless control and monitoring BlueSentry Bluetooth Sensor Interface Features BlueSentry connects to industry standard sensors Eight 16 bit Input A/D channels 0-5VDC at up to to provide wireless, remote signal monitoring and 3000Hz sample rate. device control in industrial and commercial Two on board FET switches for powering environments. external sensors. Two general purpose inputs/outputs (15ma Easily attaches to analog sensor outputs, drive) for control. automatically takes continuous measurements. High Power (Class 1 - 16db TX) 100Meter Data is transferred wirelessly to PCand PDA Bluetooth radio with integral chip antennae. clients using the Bluetooth Serial Port Profile External SMA jack Antennae option, order RN- (SPP). Or the BlueSentry can be paired with the 800S-E. BluePort XP serial adapter or Fireplug USB Low power 6-12VDC (75ma) can run from 4- dongle to create a wireless serial port connection. AAA batteries. Software applications can control and acquire Serial Port Profile enabled, slave or master data as if they were connected to a local serial mode capable. port. Low power sleep and wake on connect options. Screw post (power in, 2 ch), RJ45 (power in, 6 Wireless Analog Data Transfer ch) and 12 pin internal header connections. Small form factor: 1.6 X 3.0 X 0.9 BlueSentry contains a built in processor and smart Bluetooth radio. The device is programmed over Bluetooth via simple ASCII commands. Both ASCII and binary data formats are supported. Channels can be selected as single ended or differential measurements. www.rovingnetworks.com 809 University Ave. Los Gatos, Ca. 95032 (408)395-6539 Copyright 2009