USB3321C-GL-TR Microchip

USB332x Industrys Smallest Hi-Speed USB Transceiver with 1.8V ULPI Interface Datasheet PRODUCT FEATURES Integrated ESD protection circuits Internal 5V cable short-circuit protection of ID, DP Up to 15kV IEC Air Discharge without external and DM lines to VBUS or ground devices Industrial Operating Temperature -40C to +85C Over-Voltage Protection circuit (OVP) protects the 25 ball WLCSP lead-free RoHS compliant package VBUS pin from continuous DC voltages up to 30V (2.0 x 2.0 x 0.53mm height) Integrated USB Switch Applications No degradation of Hi-Speed electrical characteristics The USB332x is targeted for any application where a Hi- Allows single USB port of connection by Speed USB connection is desired and when board providing switching function for: space, power, and interface pins must be minimized. Battery charging Stereo and mono/mic audio The USB332x is well suited for: USB Full-Speed/Low-Speed data Cell Phones flexPWR Technology PDAs Low current design ideal for battery powered MP3 Players applications GPS Personal Navigation Devices Sleep mode tri-states all ULPI pins and places the part in a low current state Datacards 1.8V IO Voltage (10%) Scanners Integrated battery to 3.3V LDO regulator External Hard Drives 2.2uF bypass capacitor Digital Still and Video Cameras 100mV dropout voltage Portable Media Players Wrapper-less design for optimal timing performance Entertainment Devices and design ease Printers Low Latency Hi-Speed Receiver (43 Hi-Speed HDTVs clocks Max) allows use of legacy UTMI Links with a ULPI bridge Set Top Boxes/DVR/PVR External Reference Clock operation Video Record/Playback Systems ULPI Input Clock Mode (60MHz sourced by Link) IP and Video Phones 0 to 3.6V input drive tolerant Gaming Consoles Able to accept noisy clock sources as reference POS Terminals to internal, low-jitter PLL Frequencies: 12, 13, 19.2, 26, or 27MHz Smart detection circuits allow identification of USB charger, headset, or data cable insertion Includes full support for the optional On-The-Go (OTG) protocol detailed in the On-The-Go Supplement Revision 2.0 specification Supports the OTG Host Negotiation Protocol (HNP) and Session Request Protocol (SRP) UART mode for non-USB serial data transfers SMSC USB332x Revision 1.1 (11-20-12) DATASHEETIndustrys Smallest Hi-Speed USB Transceiver with 1.8V ULPI Interface Datasheet Order Numbers REFCLK FREQUENCY ORDER NUMBER (Note 0.1) PACKAGE TYPE REEL SIZE USB3321C-GL-TR 26MHz USB3322C-GL-TR 12MHz 25 Ball, WLCSP Lead-Free RoHS USB3326C-GL-TR 19.2MHz 3000 pieces Compliant Package (tape and reel) USB3327C-GL-TR 27MHz USB3329C-GL-TR 13MHz Note 0.1 All versions support ULPI Clock In Mode (60MHz input at REFCLK) This product meets the halogen maximum concentration values per IEC61249-2-21 For RoHS compliance and environmental information, please visit www.smsc.com/rohs Please contact your SMSC sales representative for additional documentation related to this product such as application notes, anomaly sheets, and design guidelines. Copyright 2012 SMSC or its subsidiaries. All rights reserved. Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently, complete information sufficient for construction purposes is not necessarily given. Although the information has been checked and is believed to be accurate, no responsibility is assumed for inaccuracies. SMSC reserves the right to make changes to specifications and product descriptions at any time without notice. Contact your local SMSC sales office to obtain the latest specifications before placing your product order. The provision of this information does not convey to the purchaser of the described semiconductor devices any licenses under any patent rights or other intellectual property rights of SMSC or others. All sales are expressly conditional on your agreement to the terms and conditions of the most recently dated version of SMSC s standard Terms of Sale Agreement dated before the date of your order (theTerms of Sale Agreemen). The product may contain design defects or errors known as anomalies which may cause the product s functions to deviate from published specifications. Anomaly sheets are available upon request. SMSC products are not designed, intended, authorized or warranted for use in any life support or other application where product failure could cause or contribute to personal injury or severe property damage. Any and all such uses without prior written approval of an Officer of SMSC and further testing and/or modification will be fully at the risk of the customer. Copies of this document or other SMSC literature, as well as the Terms of Sale Agreement, may be obtained by visiting SMSCs website at