UXN14M32K 15 GHz Divide-by-1 to 232-1 32-Bit Programmable Integer Divider Description Features The SuperDivider is a highly programmable Wide operating range: DC-15 GHz 32 integer divider covering all integer divide ratios Divide ratios: 1 to 2 -1 between 1 and 4,294,967,295 (232-1). The Large output swings: 0.8 Vpp/side device features single-ended or differential Adjustable output amplitude inputs and outputs. 3-wire serial control inputs Single-ended or differential drive are CMOS and LVTTL compatible for ease Serial Control Lines of system integration. The SuperDivider is Low SSB phase noise packaged in a 24-pin, 4 mm x 4 mm leadless Ceramic 4 mm x 4 mm package ceramic surface mount package. USB powered eval board with PC interface A Windows PC user interface is available with the eval board (UXN14M32KE). The interface Application makes it convenient to adjust the output The SuperDivider can be used as a gen- amplitude and the divide ratio. It is powered eral purpose, highly configurable, divider by USB bus so it is easy to use. Just plug the in a variety of high frequency synthesiz- UXN14M32KE into your PC, install the Mi- er applications. crosemi software, and you are using the most powerful frequency divider on the market. Pad Metallization The QFN package pad metallization is 500-1000 micro-inches of Sn63 solder dip. Key Characteristics 25C: VEE= -3.3 V, IEE=110-220 mA, Zi=50 , Zo=60 Parameter Description Min Typ Max 1 Fin (GHz) Input Frequency DC - 15 Pin (dBm) Input Power -20 0 10 Vout (Vpp) Output Voltage Per Side - 0.8 - 2 PDC (W) DC Power Dissipation 0.3 - 0.8 jc (C/W) Junction-Case Thermal Resistance - 51 - 1 Low frequency dependent on input edge speed 2 Depends on divide ratio SMD-00103 Rev E 1 of 12 Subject to Change Without Notice UXN14M32K Typical Performance SMD-00103 Rev E 2 of 12 Subject to Change Without Notice