VSC7113 10.3 Gbps Quad Signal Conditioner The VSC7113 device is a quad-channel asynchronous buffer that Highlights simpli es high-speed signal path designs (up to 10.3 Gbps) by Up to 10.3 Gbps asynchronous operation providing dual 2 x 2 crosspoint functionality along with input and output Low power modes equalization capabilities. Low power modes allow the device to scale Static and programmable input equalization power depending on data rate, and unused ports can be completely Programmable transmit output powered down. Programmable and static equalization settings provide a comprehensive Applications solution for countering signal degradation over a wide variety of 10 GbE high-speed cable and backplane interconnect transmission paths, including copper and optical media. equalization The device can be con gured for pass-through 4-channel buffer, dual 2 2 matrix, dual 1:2 duocast, or dual 2:1 selector con gurations. All signal inputs and outputs are fully differential. VSC7113 operates from a single 2.5 V supply and supports an extended temperature range of 40 C to 110 C. It is offered in a compact, 32-pin, 5 mm 5 mm QFN package. VSC7113 Line Card and Central Switch Card Applications Backplane Line Card Switch Card Serial DC to Serial DC to 10.3 Gbps 10.3 Gbps ASIC or ASIC or 4 4 VSC7113 VSC7113 VSC7111 Copper orXFP VSC7111 VSC7111 FPGA FPGA VSC7113 Optical Module Microsemi makes no warranty, representation, or guarantee regarding the information contained herein or the suitability of its products and services for any particular purpose, nor does Microsemi assume any liability whatsoever arising out of the application or use of any product or circuit. The products sold hereunder and any other products sold by Microsemi have been subject to limited testing and should not be used in conjunction with mission-critical equipment or applications. Any performance speci cations are believed to be reliable but are not veri ed, and Buyer must conduct and complete all performance and other testing of the products, alone and together with, or installed in, any end-products. Buyer shall not rely on any data and performance speci cations or parameters provided by Microsemi. It is the Buyers responsibility to independently determine suitability of any products and to test and verify the same. The information provided by Microsemi hereunder is provided as is, where is and with all faults, and the entire risk associated with such information is entirely with the Buyer. Microsemi does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other IP rights, whether with regard to such information itself or anything described by such information. Information provided in this document is proprietary to Microsemi, and Microsemi reserves the right to make any changes to the information in this document or to any products and services at any time without notice.VSC7113 10.3 Gbps Quad Signal Conditioner Flexible Architecture Related Products 0 Gbps to 10.3 Gbps asynchronous operation Visit www.microsemi.com for information about these related 4-channel buffer, dual 2 2 matrix, dual 1:2 duocast, or dual products: 2:1 selector con gurations Ethernet Switches Optimized for ease of use and customer cost Crosspoint Switches 1G and 10G PHYs Broad Input/Output Capabilities Input EQ of 20 dB at 10.3 Gbps Static or programmable transmit pre-emphasis up to 5 dB Input sensitivity 100 mV differential peak-to-peak Key Speci cations 2.5 V power supply 118 mW typical power consumption per channel in Green mode 32-pin, 5 mm 5 mm QFN package Extended temperature range of 40 C ambient to 110 C junction 2.5 V A0P Y0P EQ PE A0N Y0N Y1P A1P PE EQ Y1N A1N Channel 0 A2P Y2P EQ A2N PE Y2N Y3P A3P PE EQ Y3N A3N Channel 1 Two-Wire/Four-Wire Static Control Control Logic Serial Control Microsemi Corporation (Nasdaq: MSCC) offers a comprehensive portfolio of semiconductor and system solutions for com- munications, defense and security, aerospace, and industrial markets. Products include high-performance and radiation- hardened analog mixed-signal integrated circuits, FPGAs, SoCs, and ASICs power management products timing and synchronization devices and precise time solutions voice processing devices RF solutions discrete components enter- prise storage and communications solutions, security technologies, and scalable anti-tamper products Ethernet solutions Power-over-Ethernet ICs and midspans custom design capabilities and services. Microsemi is headquartered in Aliso Viejo, California, and has approximately 4,800 employees worldwide. Learn more at www.microsemi.com. Microsemi Corporate Headquarters One Enterprise, Aliso Viejo, CA 92656 USA Within the USA: +1 (800) 713-4113 Outside the USA: +1 (949) 380-6100 20152016 Microsemi Corporation. All rights reserved. Microsemi and the Microsemi logo are registered trademarks of Microsemi Corporation. All other trademarks Sales: +1 (949) 380-6136 and service marks are the property of their respective owners. Fax: +1 (949) 215-4996 VPPD-03926. 1.1. 4/16 email: sales.support microsemi.com www.microsemi.com