VSC8489-15 Single Channel WAN/LAN/Backplane RXAUI/XAUI to SFP+/KR 10 GbE PHY with Optional VeriTime Microsemi s single channel PHY provides support for IEEE 802.3ae Highlights 10 Gbps Ethernet and optional IEEE 1588v2, as well as hardware- Single port 10 Gbps PHY-only mode based KR operation for single channel Ethernet-based applications. IEEE 1588v2 compliant The single channel VSC8489-15 complements Microsemi s portfolio of Con gurable LAN and WAN support single, dual, and quad channel integrated IEEE 802.1AE MACsec and RXAUI/XAUI host-side connectivity IEEE 1588v2 Ethernet PHY transceivers. SFP+ I/O with KR support VeriTime is Microsemi s patent-pending timing technology 1 Gbps Ethernet mode support that delivers the industrys most accurate IEEE 1588v2 timing implementation. The IEEE 1588v2 timing integrated in the PHY is the Applications quickest, lowest cost method of implementing the timing accuracy that Single-port RXAUI/XAUI to SFI/SFP+ line is crucial for maintaining existing timing-critical capabilities during the cards or NICs migration from circuit-based to packet-based architectures. 10GBASE-KR compliant backplane The VSC8489-15 device supports time stamping for 1588 PTP ordinary connections clock, boundary clock, and one-step and two-step transparent clock Carrier Ethernet and broadband access modes of operation, along with complete Y.1731 OAM performance networks requiring IEEE 1588v2 timing and monitoring capabilities. synchronization The device meets the SFP+, SR, LR, ER, ZR, direct attach copper, Data center WAN interconnections and OM3 (300 meters) and OM4 (400 meters) multi mode ber host 10 Gbps Ethernet switch cards and router requirements, in accordance with the SFF-8431 speci cations. It also interface modules compensates for optical impairments for above SFP+ applications, along with degradations of the PCB. VSC8489-15 provides KR support, including Clause 72 link training, Clause 73 backplane autonegotiation, and optional Clause 74 FEC. The transmit path incorporates a multitap output driver to provide exibility to meet the demanding IEEE 802.3ap 10GBASE-KR Tx output launch requirements. The device uses a single 156.25 MHz reference clock for LAN/WAN operation. Its exible clocking options enable Layer 1 support for Synchronous Ethernet. A complete suite of BIST functionality includes line and client loopbacks along with pattern generation and error detection. Switch Module 10 GbE Line Card or NIC RXAUI/XAUI 1 10G 1 1G RXAUI/ 1 1 Single 1 1 1 VSC8489-15 XAUI Module VSC8489-15 10 GbE Switch 1 10G MAC/NIC RXAUI/ 1 1G XAUI 10GBASE-KR Backplane Microsemi makes no warranty, representation, or guarantee regarding the information contained herein or the suitability of its products and services for any particular purpose, nor does Microsemi assume any liability whatsoever arising out of the application or use of any product or circuit. The products sold hereunder and any other products sold by Microsemi have been subject to limited testing and should not be used in conjunction with mission-critical equipment or applications. Any performance speci cations are believed to be reliable but are not veri ed, and Buyer must conduct and complete all performance and other testing of the products, alone and together with, or installed in, any end-products. Buyer shall not rely on any data and performance speci cations or parameters provided by Microsemi. It is the Buyers responsibility to independently determine suitability of any products and to test and verify the same. The information provided by Microsemi hereunder is provided as is, where is and with all faults, and the entire risk associated with such information is entirely with the Buyer. Microsemi does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other IP rights, whether with regard to such information itself or anything described by such information. Information provided in this document is proprietary to Microsemi, and Microsemi reserves the right to make any changes to the information in this document or to any products and services at any time without notice. 10 GbELine VSC8489-15 Single Channel WAN/LAN/Backplane RXAUI/XAUI to SFP+/KR 10 GbE PHY with Optional VeriTime Range of Support Flexibility IEEE 1588v2/Y.1731 OAM precision timing support at Optional 2 channel input design on the host side for failover 1.25Gbps and 10.3 Gbps protection Compliant to IEEE 802.3ae and SFF-8431 electrical (SFI) VScope input signal monitoring integrated circuit speci cations Host-side and line-side loopbacks with BIST functions 9.95 Gbps WAN and 10.3 Gbps LAN operation, as well as I/O programmability for lane swap, invert, amplitude, slew, pre- 1.25 Gbps Ethernet support emphasis, and equalization Supports all standard SFP+ applications Optional forward error correction (FEC) Support for 10GBASE-KR (IEEE 802.3ap) for 10G backplanes, Synchronous Ethernet support with exible clocking including 1.25 Gbps and 10.3 Gbps auto-negotiation and link Passive copper cable support for low-cost DAC connectivity training Pin-compatible with VSC8489, VSC8490, and VSC8491 Adaptive equalization receiver and programmable, multitap Related Products transmitter pre-emphasis Synchronous Ethernet support Visit www.microsemi.com for information about these related MDIO/SPI and two-wire serial slave management interfaces products: VSC8489 Key Speci cations VSC8490 1.7 W typical for a single bidirectional channel VSC8491 1.2 V and 1.0 V core power supplies (2.5 V TTL supply) VSC8572 0 C ambient to 110 C junction temperature range VSC8574 VSC8584 PLL Clocking Network for Timing and Retiming (including SyncE support) PLL RXAUI SFP+ XAUI KR 1 GbE 1GbE PCS 1 2 6.25 G 1 10 G MUX FIFO SERDES 1 4 3.125 G SERDES PCS WIS XGXS 1 1 G 1 1.25 G SPI/MDIO/ MDIO Slave Two-Wire Serial Slave Configuration and Status Registers Two-Wire Serial SPI Slave Two-Wire Serial Master Two-Wire Serial Microsemi Corporation (Nasdaq: MSCC) offers a comprehensive portfolio of semiconductor and system solutions for communications, defense & security, aerospace and industrial markets. Products include high-performance and radiation-hardened analog mixed-signal integrated circuits, FPGAs, SoCs and ASICs power management products timing and synchronization devices and precise time solutions, setting the worlds standard for time voice processing devices RF solutions discrete components security technologies and scalable anti-tamper products Ethernet solutions Power-over-Ethernet ICs and midspans as well as custom design capabilities and services. Microsemi is headquartered in Aliso Viejo, Calif., and has approximately 3,600 employees globally. Learn more at www.microsemi.com. Microsemi Corporate Headquarters One Enterprise, Aliso Viejo, CA 92656 USA Within the USA: +1 (800) 713-4113 Outside the USA: +1 (949) 380-6100 2015 Microsemi Corporation. All rights reserved. Microsemi and the Microsemi logo are registered trademarks of Microsemi Corporation. All other trademarks Sales: +1 (949) 380-6136 and service marks are the property of their respective owners. Fax: +1 (949) 215-4996 VPPD-04014. 1.0. 12/15 email: sales.support microsemi.com www.microsemi.com Host/Client