VX-501-0255-80M0 VCXO VX-501-0255-80M0 Nominal frequency (f0) 80 MHz Performance Specications Frequency stabilities Parameter Min Typical Max Units Condition APR> 20ppm incl. df vs initial, temp -40...85 C, dVs, dLoad, aging Additional information Frequency Tuning Parameter Min Typical Max Units Condition Absolute pulling range (APR) (df/f0) 20 ppm ext. tuning voltage 0 to 3.3V Linearity 10 % slope (pos./neg.) positiv Frequency control input impedance 1000 kOhm RF output Parameter Min Typical Max Units Condition Signal LVCMOS Load 13.5 15 16.5 pF Fan out 3 Rise Time 3 ns 20 to 80 %Vout Fall Time 3 ns 80 to 20 %Vout Duty cycle 45 55 % 1.65 V V Low 0.3 V V High 2.97 V Spurious -100 dBc Page 1 of 4 Vectron International Supply voltage Parameter Min Typical Max Units Condition Supply voltage (Vs) 3.14 3.3 3.47 V Current consumption steady state 24 mA Vsnom & 25 C Additional Parameters Parameter Min Typical Max Units Condition Phase Noise -75 dBc/Hz 10Hz -108 dBc/Hz 100Hz -130 dBc/Hz 1kHz -149 dBc/Hz 10kHz -154 dBc/Hz 100kHz -158 dBc/Hz 1MHz -161 dBc/Hz 10MHz psec Jitter 0.1 12kHz to 80MHz (RMS) Additional information Jitter typ 0.08psec Processing & Packing handling&processing note Additional Environmental Conditions Parameter Description 100% RoHS 6 compliant RoHS compliance non-washable device Washable ESD HBM JESD22-A114F Class 1C - 10* 2000V Mechanical Shock MIL-STD-202 Meth 213B Cond. C - 100g 6ms 6 shocks in each direction Vibration, Sine MIL-STD-883 Meth 2007 Cond A - 20g 20-2000Hz 4x in each 3 axis 4min sweep time JESD22-A113-B - only if > MSL 1 Moisture Sen. Level Solderabiltiy J-STD-002C Cond. A, Trough hole device Cond.B, SMD ( correspond to MIL-STD-883 Meth 2003) - 255 C (diving Time 5 0,5sec.) Dip&Look with 8h damp pre-treatment: solder wetting >95% MIL-STD-202 Meth108A Cond C - 1000h 105 C under voltage High temp operating life(HTOL) IEC 60068-2-1 Cond. Ae - Ta= -40 C, >1000 hours with bias for OCXO Low temp operating life(LTOL) Reow Simulation Test J-STD-020D - Total 3x Lead free prole (for SMD) Absolute Maximum Ratings Parameter Min Typical Max Units Condition Operable temperature range -40 +85 C Storage temperature range -40 +90 C Page 2 of 4 Vectron International