SMD18PL-TP Micro Commercial Components (MCC)

SMD15PL THRU SMD18PL Features Halogen Free. Green Device (Note 1) High Current Capability 1 Amp Low Forward Voltage Lead Free Finish/RoHS Compliant(Note 2) Suffix Designates Schottky Rectifier Compliant. See Ordering Information) Epoxy Meets UL 94 V-0 Flammability Rating 50 to 80 Volts Moisture Sensitivity Level 1 Maximum Ratings Operating Junction Temperature Range: -55C to +125C Storage Temperature Range: -55C to +150C Maximum Thermal Resistance: 28C/W Junction to Lead SOD-123FL Maximum Thermal Resistance: 100C/W Junction to Ambient Maximum Maximum DC MCC Device Recurrent Maximum Blocking A Part Number Marking Peak Reverse RMS Voltage Voltage B Voltage SMD15PL D5 50V 35V 50V C E D6 SMD16PL 60V 42V 60V Cathode Mark SMD18PL D8 80V 56V 80V Electrical Characteristics 25C Unless Otherwise Specified Average Forward I 1.0A T =90C F(AV) L Current Peak Forward Surge I 30A 8.3ms,Half Sine FSM Current DIMENSIONS Maximum INCHES MM Instantaneous DIM NOTE MIN MAX MIN MAX Forward Voltage A 0.130 0.152 3.30 3.85 V I =1.0A 0.70V F FM SMD15PL-16PL B 0.100 0.122 2.55 3.10 C 0.055 0.075 1.40 1.90 T =25C (Note 3) 0.85V SMD18PL J D 0.035 0.053 0.90 1.35 E 0.020 0.041 0.50 1.05 Maximum DC T =25C G 0.010 ---- 0.25 ---- 0.1mA J Reverse Current at I R H ---- 0.010 ---- 0.25 Rated DC Blocking 10mA T =100C J Voltage Suggested Solder Pad Layout Typical Junction Capacitance 2.36mm Measured at C 40pF SMD15PL-16PL J 1.0MHz, V =4.0V R 30pF SMD18PL Note: 1. Halogen freeGreen products are defined as those which contain <900ppm bromine, 1.22mm <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 2. High Temperature Solder Exemption Applied, See EU Directive Annex 7a. 3. Pulse Test: Pulse Width 300 sec, Duty Cycle 2% 0.91mm Rev.3-4-12012020 1/3 MCCSEMI.COMSMD15PL THRU SMD18PL Curve CharacteristicsCurve Characteristics Fig. 1 - Forward Current Derating Curve Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current 1.2 35 30 1.0 25 0.8 20 0.6 15 0.4 10 0.2 5 Resistive or Inductive Load 8.3 ms Single Half Sine-Wave 0.0 0 0 25 50 75 100 125 1 10 100 Lead Temperature (C) Number of Cycles at 60 Hz Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 4 - Typical Instantaneous Forward Characteristics 5 5 T =125C T =125C 2 2 J J 1 1 0.5 0.5 0.2 0.2 0.1 0.1 T =75C T =75C J J 0.05 0.05 0.02 0.02 T =25C J SMD15PL-16PL SMD18PL T =25C J 0.01 0.01 0.0 0.1 0.2 0.3 0.4 0.6 0.5 0.7 0.8 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Instantaneous Forward Voltage (V) Instantaneous Forward Voltage (V) Fig. 5 - Typical Reverse Leakage Characteristics Fig. 6 - Typical Reverse Leakage Characteristics 10000 1000 100 1000 T =125C J T =125C J 10 100 T =75C T =75C J 1 J 10 0.1 T =25C J SMD15PL-16PL T =25C SMD18PL J 1 0.01 20 40 60 80 100 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Percent of Rated Peak Reverse Voltage (%) Rev.3-4-12012020 2/3 MCCSEMI.COM Instantaneous Reverse Leakage Current (A) Instantaneous Forward Current (A) Average Forward Current (A) Instantaneous Forward Current (A) Instantaneous Reverse Leakage Current (A) Peak Forward Surge Current (A)