Micron Confidential and Proprietary 2GB, 4GB, 8GB, 16GB, 32GB, 64GB: eMMC Features eMMC Memory MTFC2GMDEA-0M WT, MTFC4GLDEA-0M WT, MTFC4GMDEA-1M WT, MTFC8GLDEA-1M WT, MTFC16GJDEC-2M WT, MTFC32GJDED-3M WT, MTFC64GJDDN-3M WT Figure 1: Micron eMMC Device Features MultiMediaCard (MMC) controller and NAND Flash 153- or 169-ball WFBGA/VFBGA/LFBGA (RoHS 6/6- compliant) V : 2.73.6V CC V (dual voltage): 1.651.95V 2.73.6V CCQ MMC MMC Temperature ranges MMC controller interface power Operating temperature: 25C to +85C Storage temperature: 40C to +85C Typical current consumption Standby current: 110A for 2GB, 120A for 4GB, 8GB, 16GB 140A for 32G 160A for 64GB NAND Flash Active current (RMS): 70mA (2GB) 80mA (4GB, NAND Flash power 8GB, 16GB, 32GB, 64GB) MMC-Specific Features JEDEC/MMC standard version 4.41-compliant (JEDEC Standard No. 84-A441) SPI mode not supported (see www.jedec.org/sites/default/files/ docs/JESD84-A441.pdf) MMC-Specific Features (Continued) Advanced 11-signal interface Enhanced reliable write x1, x4, and x8 I/Os, selectable by host Configurable reliability settings MMC mode operation Background operation Command classes: class 0 (basic) class 2 (block Fully enhanced configurable read) class 4 (block write) class 5 (erase) Backward-compatible with previous MMC class 6 (write protection) class 7 (lock card) modes MMCplus and MMCmobile protocols ECC and block management implemented Temporary write protection 52 MHz clock speed (MAX) Boot operation (high-speed boot) Sleep mode Replay-protected memory block (RPMB) Secure erase and trim Hardware reset signal Multiple partitions with enhanced attribute Permanent and power-on write protection Double data rate (DDR) function High-priority interrupt (HPI) 09005aef8523cb32 Micron Technology, Inc. reserves the right to change products or specifications without notice. 1 emmc 2gb-64gb ctrd 441-wt.pdf - Rev. C 06/18 EN 2013 Micron Technology, Inc. All rights reserved. Products and specifications discussed herein are subject to change by Micron without notice.Micron Confidential and Proprietary 2GB, 4GB, 8GB, 16GB, 32GB, 64GB: eMMC Features eMMC Performance Table 1: MLC Partition Performance Part Number MTFC16GJDEC-2M WT MTFC2GMDEA-0M WT MTFC4GMDEA-1M WT MTFC32GJDED-3M WT Condition MTFC4GLDEA-0M WT MTFC8GLDEA-1M WT MTFC64GJDDN-3M WT Units Sequential write 6.6 13.5 20 MB/s Sequential read 30 44 44 MB/s Random write 90 90 90 IOPs Random read 1080 1080 1100 IOPs Note: 1. Bus in x8 I/O mode. Sequential access of 1MB chunk random access of 4KB chunk. Additional performance data, such as power consumption or timing for different device modes, will be provided in a separate docu- ment upon customer request. Ordering Information Table 2: Ordering Information NAND Flash Base Part Number Density Package Type Shipping Media MTFC2GMDEA-0M WT 2GB 153-ball WFBGA 1 x 16Gb, MLC, 25nm Tray 11.5mm x 13.0mm x 0.8mm Tape and reel MTFC4GLDEA-0M WT 4GB 153-ball WFBGA 1 x 32Gb, MLC, 25nm Tray 11.5mm x 13.0mm x 0.8mm Tape and reel MTFC4GMDEA-1M WT 4GB 153-ball WFBGA 2 x 16Gb, MLC, 25nm Tray 11.5mm x 13.0mm x 0.8mm Tape and reel MTFC8GLDEA-1M WT 8GB 153-ball WFBGA 2 x 32Gb, MLC, 25nm Tray 11.5mm x 13.0mm x 0.8mm Tape and reel MTFC16GJDEC-2M WT 16GB 169-ball WFBGA 2 x 64Gb, MLC, 25nm Tray 14.0mm x 18.0mm x 0.8mm Tape and reel MTFC32GJDED-3M WT 32GB 169-ball VFBGA 4 x 64Gb, MLC, 25nm Tray 14.0mm x 18.0mm x 1.0mm Tape and reel MTFC64GJDDN-3M WT 64GB 169-ball LFBGA 8 x 64Gb, MLC, 25nm Tray 14.0mm x 18.0mm x 1.4mm Tape and reel 09005aef8523cb32 Micron Technology, Inc. reserves the right to change products or specifications without notice. 2 emmc 2gb-64gb ctrd 441-wt.pdf - Rev. C 06/18 EN 2013 Micron Technology, Inc. All rights reserved.