Embedded USB Mass Storage Drive (e130)
Features
RealSSD Embedded USB
Mass Storage Drive (e130)
MTFDCAE001SAF, MTFDCAE002SAF,
MTFDCAE004SAF, MTFDCAE008SAF
Options
Features
3
Micron NAND Flash Capacity (unformatted): 1GB, 2GB, 4GB, or 8GB
Interface: Universal Serial Bus (USB) Specification, Form factor
Revision 2.0 Standard (36.9mm x 26.6mm x 9.6mm)
USB support Voltage: 5V 5%
USB Specification, Revisions 2.0, 1.1 Operating temperature
USB Mass Storage Class Specification, Revision 1.0 Commercial (0C to +70C)
Performance Industrial (40C to +85C)
1
Sequential READ: 33 MB/s
1
Sequential WRITE: 22 MB/s
Notes: 1. Typical transfer rate measured with
Reliability: 4 million operating hours mean time
H2BENCH 3.6.
between failures (MTBF)
2. Assumes that 70% of total usable drive
Endurance: useful operating life of at least 5 years
capacity contains static files.
under the following conditions:
3. 1GB = 1 billion bytes; formatted capacity is
8760 power-on hours per year
less.
Active 100% of power-on hours
2
Typical operating conditions
1GB module8 GB/day
2GB module16 GB/day
4GB module32 GB/day
8GB module64 GB/day
Static and dynamic wear-leveling
8-symbol error correction code (ECC)
Password protection
Reliability reporting
PDF: 09005aef82e4c677/Source: 09005aef82e4cd19 Micron Technology, Inc., reserves the right to change products or specifications without notice.
eusb_130_embedded.fm - Rev. F 5/10 EN 1 2007 Micron Technology, Inc. All rights reserved.
Products and specifications discussed herein are subject to change by Micron without notice. Embedded USB Mass Storage Drive (e130)
Part Numbering Information
Part Numbering Information
Micron RealSSD embedded USB drives are available in several configurations and densi-
ties. Visit micron.com for a list of valid part numbers.
Figure 1: Part Number Chart
MT FD C AE 002 S AF -1 B 1 IT ES
Micron Technology Production Status
Blank = Production
Product Family ES = Engineering sample
FD = Flash drive MS = Mechanical sample
Drive Interface Operating Temperature Range
C = USB 2.0 Blank = Commercial (0C to +70C)
IT = Industrial (40C to +85C)
Drive Form Factor
AE = Embedded USB: 36.9mm x 26.6mm x 9.6mm Revision
1 = 1st generation
Drive Density 2 = 2nd generation
001 = 1GB 3 = 3rd generation
002 = 2GB
004 = 4GB NAND Component
008 = 8GB B = 8Gb; x8; 3.3V
C = 16Gb; x8; 3.3V
NAND Flash Type D = 4Gb; x8; 3.3V
S = SLC
Firmware Revision
Product Family 1 = 1st generation
AA = Option A
AB = Option B
AC = Option C
AD = Option D
AE = Option E
AF = Option F
PDF: 09005aef82e4c677/Source: 09005aef82e4cd19 Micron Technology, Inc., reserves the right to change products or specifications without notice.
eusb_130_embedded.fm - Rev. F 5/10 EN 2 2007 Micron Technology, Inc. All rights reserved.